Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
- Coupling and power shafts
   General information
   Coupling - the general information and check of a condition of components
   Removal and installation of the main cylinder of coupling
   Removal and installation of the executive cylinder of coupling
   Air removal from a hydraulic path of a drive of switching off of coupling
   Removal, check of a condition and installation of components of assembly of coupling
   Removal, check of a condition and installation of the vyzhimny bearing and lever of switching off of coupling
   Adjustment of a pedal of coupling
   Check of serviceability of functioning and replacement of the sensor switch of disconnection of a chain of a starter
   Power shafts - the general information and condition check
   Removal and installation of power shafts
   Check of a condition and replacement of assembly of the basic bearing
   Replacement of protective covers and check of a condition of CV JOINTS
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
9a1e70e9



Coupling and power shafts

Specifications

Coupling


Type One-disk, dry with a hydraulic actuator (Gidrotransformator with blocking possibility on models from AT)
Type of hydraulic liquid See. Head of Control and routine maintenance
Standard height of a pedal of coupling, mm 168 ÷ 175
Free wheeling of a pedal of coupling, mm
Models for 1996 вып. 1 ÷ 3
Models since 1997 вып. 9 ÷ 16
Power shafts
Length of protective covers of CV JOINTS, mm
Internal hinge 97 ÷ 99
External hinge 96 ÷ 98
Efforts of a tightening of carving connections Nanometer
Nuts of fastening of the main cylinder of coupling 8 ÷ 11
Bolts of fastening of the executive cylinder of coupling 30 ÷ 40
Hollow bolt of shtutserny connection гидравлическогошланга to the executive cylinder 17 ÷ 19
Bolts of fastening of assembly of a basket of coupling 34 ÷ 44
Bolts of fastening of the basic bearing to the arm 13 ÷ 19
Stupichnye of a nut 235 ÷ 314