Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
- Brake system
   General information
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes of disk brake mechanisms
   Removal and installation of supports of disk brake mechanisms
   Condition check, removal and installation of a brake disk
   Replacement of boots of drum-type brake mechanisms of back wheels
   Removal and installation of wheel cylinders
   Removal and installation of the main brake cylinder
   Replacement of the dosing-out valve regulator
   Check of a condition and replacement of brake lines and hoses
   Pumping of brake system
   Check of serviceability of functioning/tightness, replacement and adjustment of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Cable replacement (ов) drive of the parking brake
   Adjustment of a pedal of a foot brake
   Check of serviceability of functioning and replacement of the sensor switch of stoplights
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
9a1e70e9



Brake system

Specifications

General parameters


System type electronic 4-kanalnaya/4-touch ABS with systems of electronic distribution of brake effort and Brake Assist (probably to order). Ventilated disk forward, disk or drum-type back, a diagonal contour, the hydrovacuum amplifier
Type of brake liquid See. Head of Control and routine maintenance
Disk brake mechanisms
Brake mechanisms of forward wheels
Type
Models 1993 and 1994 of вып CL25VB
Models since 1995 вып. CL25VB or CL25VE
Diameter of an opening of the cylinder, mm
CL25VB 57.2
CL25VE 40.2
Geometrical parameters of blocks (length x width x thickness), mm
CL25VB 125.6 x 45.3 x 11
CL25VE 140.0 x 45.3 x 11
Geometrical parameters of a brake disk (diameter x thickness), mm
CL25VB 280 x 22
CL25VE 280 x 26
Brake mechanisms of back wheels
Type
Models 1993 and 1994 of вып. CL9H
Models since 1995 вып. CL9HB
Diameter of an opening of the cylinder, mm
CL9H 33.96
CL9HB 33.96
Geometrical parameters of blocks (length x width x thickness), mm
CL9H 75.0 x 40.0 x 9
CL9HB 89.1х 39.5 x 10
Geometrical parameters of a brake disk (diameter x thickness), mm
CL9H 258 x 10
CL9HB 278 x 9
Minimum admissible thickness of brake shoes See. Head of Control and routine maintenance
Minimum admissible thickness of a brake disk, mm See the marking cast on a disk
Maximum admissible size of palpation of a brake disk, mm
Forward brake mechanisms 0.07
Back brake mechanisms 0.15
Maximum admissible size of variations of thickness of a brake disk, mm
Forward brake mechanisms 0.01
Back brake mechanisms 0.02
Drum-type brake mechanisms of back wheels
Minimum admissible thickness of frictional overlays of brake boots, mm See. Head of Control and routine maintenance
Maximum admissible internal diameter of a drum, mm See the marking cast on a disk
Maximum admissible size of ovality of a drum, mm 0.03
Main brake cylinder
Diameter of an opening of the cylinder, mm 23.81
Vacuum amplifier of brakes
Type
Models 1993 and 1994 of вып. M195-V1125T
Models since 1995 вып. M215T
Diameter of a diaphragm, mm
M195-V1125T
Primary diaphragm 205-230
Secondary diaphragm 180-205
M215T
Primary diaphragm 230
Secondary diaphragm 205
Length of an exit of a rod of a pusher, mm 10.275 ÷ 10.525
Distance from assembly of the amplifier to a cutting finger of a rod, mm 125
Adjustments of a pedal of a foot brake
Height of situation in the released condition, mm
Models with RKPP 159 ÷ 165
Models with AT 169 ÷ 174
Free wheeling, mm 0.04 ÷ 0.12
Height of provision of the squeezed-out pedal, mm
Models 1993 and 1994 of вып. 90
Models since 1995 вып.
Models with RKPP 70
Models with AT 75
Parking brake
Drive Lever
Number of clicks of a ratchet when applying effort in 20 kgfs
Models 1993 and 1994 of вып. 8 ÷ 10
Models since 1995 вып. 10 ÷ 11
Number of clicks of a ratchet before operation of the sensor switch of a control lamp
Models 1993 and 1994 of вып. 1 ÷ 2
Models since 1995 вып. 1
Sensor switch of stoplights
Gap size between a plunzher of the sensor switch and an emphasis of a pedal, mm 0.3 ÷ 1.0
Efforts of a tightening of carving connections Nanometer
Nuts of fastening of the servo-driver of the vacuum amplifier of brakes
Models 1993 and 1994 of вып. 8 ÷ 11
Models since 1995 вып. 13 ÷ 16
Bolts of fastening of supports (lobbies and back disk brake mechanisms) 22 ÷ 31
Bolts of fastening of an anchor bracket
Forward brake mechanisms 72 ÷ 97
Back brake mechanisms 38 ÷ 52
Hollow bolt of shtutserny knot of connection of a brake hose to a support of the brake mechanism (forward or back) 17 ÷ 20
Bolts of fastening of wheel cylinders 6 ÷ 11
Gates of pumping of supports and wheel cylinders 7 ÷ 9
Nuts of fastening of GTTs
Models of 1993 вып. 8 ÷ 11
Models since 1994 вып. 12 ÷ 15
Bolts of fastening of wheels See. Head of Control and routine maintenance