1. Disconnect a negative wire from the battery.
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action! |
|
2. Turn out two screws of fastening of bottom edge of the panel of an internal upholstery. |
|
3. Having accurately hooked a screw-driver under a first line, liberate from an armrest the control panel functioning by the window regulator electric drive, disconnect from the taken panel electroconducting. |
|
4. Remove facing of the internal handle of a door. |
|
5. Turn out the fixing screw located in a pocket of the zakhvatny handle of an armrest. |
|
6. Having delayed the panel of an internal upholstery from a door, disunite contact sockets of electroconducting passing under it. |
|
7. About the ensuring access purpose in a doorframe remove the protective insulating screen, - try not to damage a film. Do not forget to return the screen into place before installation of the obivochny panel. In case of need in addition use for film fastening hermetic. |
8. Make sure of serviceability of a condition and presence on the places of all regular clamps of the panel of an internal upholstery of a door. 9. Restore initial connection of electroconducting and establish the upholstery panel on a door. latch clamps and tighten fixing screws. Establish into place the control panel functioning of the electric drive of window regulators. |