Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks and fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of temperature of the engine and fuel consumption
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Check of serviceability of functioning, removal and installation of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   The electric drive of the top hatch - general information and check of serviceability of functioning
   The electric drive of forward seats - general information and check of serviceability of functioning
   Transfer of management by functioning of onboard consumers of the electric power on switched lines
   Safety cushions - the general information
   + Schemes of electric connections
9a1e70e9



Removal and installation of the aerial of a radio receiver

Driving electromotor

 PERFORMANCE ORDER

1. Give a nut of fastening of a mast of the aerial. In order to avoid damage of LKP paste on a surrounding nut a surface of the body panel a protective layer of an adhesive tape.

2. In a luggage compartment release plastic clamps of fastening of the right finishing panel for the purpose of ensuring access to the electromotor of a drive of the aerial.

3. Turn out fixing screws, disconnect electroconducting and remove electromotor assembly from the car.

4. Installation is made upside-down.

Aerial mast

 PERFORMANCE ORDER

 The help of the assistant is required.

1. Give a nut of fastening of a mast.

2. Holding an aerial mast, ask to include ignition and a radio receiver, the aerial should leave itself gearing with the driving motor.

3. At installation of a mast track, that the driving cable appeared is turned by a tooth back on the car. Ask the assistant to include ignition and a radio receiver - the aerial should be involved itself in electromotor assembly.
4. Further installation is made as it should be, the return to an order of dismantle of components.

Aerial lattice

 PERFORMANCE ORDER

1. On the majority of models the accepting lattice of the aerial is pasted on back glass of the car in a combination with a heater lattice.
2. The antenna lattice is pasted in the top part of glass. Check of serviceability of a condition and regenerative repair of an antenna lattice is made also as well as for a heater lattice (see. Section Check of serviceability of functioning and regenerative repair of a heater of back glass).