Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks and fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of temperature of the engine and fuel consumption
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Check of serviceability of functioning, removal and installation of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   The electric drive of the top hatch - general information and check of serviceability of functioning
   The electric drive of forward seats - general information and check of serviceability of functioning
   Transfer of management by functioning of onboard consumers of the electric power on switched lines
   Safety cushions - the general information
   + Schemes of electric connections
9a1e70e9



Replacement of lamps

 Flasks of lamps remain hot within about 20 minutes after shutdown of lighting devices. Before starting to work make sure that components finally cooled down.

Forward dimensional fires/indexes of turns

 PERFORMANCE ORDER

1. To Poddomkratta the car also establish it on props.

2. Access to assemblies of indexes of turns and marker lights opens from below.

3. The boss of a marker light is taken by a pulling from the landing nest. The boss of the index of turn is necessary also for turning. For lamp extraction from the boss it is necessary for pressing and turning counter-clockwise.

Lateral marker lights

 PERFORMANCE ORDER

1. Open a cowl, turn out the screw located near a casing of a head block headlight, then shake assembly of a lateral marker light (on models of early years of release - the repeater of the index of turn). Pull assembly strictly outside and liberate it from the body panel.

2. Take a lamp from the boss and replace it new.

Back marker lights and stoplights

The lamps located in a body part of the combined lamp

 PERFORMANCE ORDER

1. Open a cover of a luggage compartment. Uncover an observation port in the panel of internal furnish for the purpose of ensuring access to assembly of the back combined lamp. The boss of an external lamp it is equipped with a rubber cap. For ensuring access to a lamp of a marker light it is necessary to remove a plastic cover.

2. For lamp extraction from the boss it should be wrung out down and to turn counter-clockwise.

The lamps located in placed on a cover of a luggage compartment of a part of lantern assembly

 PERFORMANCE ORDER

1. Open a cover of a luggage compartment and turn out two screws of fastening of a plate of a lampoderzhatel on the back party of lantern assembly.

2. For lamp extraction from the boss it should be wrung out down and to turn counter-clockwise.

Illumination of registration plate

 PERFORMANCE ORDER

1. Turn out fixing screws and remove a lens from assembly of a lamp of illumination of registration plate. For the purpose of ensuring access to a lamp extend a cartridge from assembly.

2. For extraction of a lamp pull it strictly back.

Stoplights of the top level

 PERFORMANCE ORDER

Wring out a cover of lantern assembly to the right, the son-in-law pull it and remove. The lamp is simply extended from the boss.

Illumination of devices

 PERFORMANCE ORDER

Remove a combination of devices (see. Section Removal and installation of a combination of devices). Lamps are taken from a back part of the printed-circuit board of a combination of devices.

Internal lamps (salon, luggage compartment)

 PERFORMANCE ORDER

1. For removal of plafonds of mate lamps / салонного the lamp it should be hooked a small screw-driver.
2. For extraction of mate lamps they should be turned in the boss. The two-socle lamp of the ceiling lamp is simply extended from podpruzhinenny contact plugs of the boss. Try not to touch flasks barehanded, - formation of fatty spots can essentially lower lamp service life.