Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks and fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of podrulevy switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of temperature of the engine and fuel consumption
   Removal and installation of a combination of devices
   Removal and installation of a radio receiver and loudspeakers
   Removal and installation of the aerial of a radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Check of serviceability of functioning, removal and installation of the electromotor of a drive of screen wipers
   Check of serviceability of functioning and replacement of horns of a horn
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Control system of speed (темпостат) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   The electric drive of the top hatch - general information and check of serviceability of functioning
   The electric drive of forward seats - general information and check of serviceability of functioning
   Transfer of management by functioning of onboard consumers of the electric power on switched lines
   Safety cushions - the general information
   + Schemes of electric connections
9a1e70e9



Check of serviceability of functioning and replacement of switches of the dashboard

 Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation. Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.

The switches which have been built in in the panel of facing of a combination of devices

 PERFORMANCE ORDER

1. Disconnect SRS. In the panel of facing of a combination of devices some switches are built in. To the left of a steering column switches of management functioning of the electric drive of rear-view mirrors, the main switch темпостата (Vkl/Vykl), and also (are located at the corresponding complete set of the car) a control lamp of anticreeping system and the switch of antifog lighting. To the right of a steering column are the handle of adjustment of intensity of illumination of devices and on models 1993 and 1994 of вып.) switch of the alarm system. On models since 1995 вып. the switch of the alarm system is placed in the central part of the panel.

2. Each of switches can be removed from the forward party of the panel by a poddevaniye way a screw-driver. Remark: In order to avoid damage of the panel wind a screw-driver sting with an adhesive tape. Simple switches, such as the switch of antifog lighting, should show conductivity between plugs of the 2-contact socket only at the included ignition. Between plugs of the 3-contact switch of management intensity of illumination of devices conductivity should take place in any position of the ignition key, except OFF.

3. Having liberated the switch from the panel, disconnect from it electroconducting.
4. Check correctness of distribution of conductivity between socket plugs. Faulty assemblies replace.
Position of the switch
Conductivity existence between plugs
OFF (off)
Conductivity is absent
To the right
1 and 2
To the left
2 and 3
Up
2 and 3
Down
1 and 2
Mirror heating
1, 3 and 10

 
Position of the switch
Conductivity existence between plugs
OFF (off)
Conductivity is absent
Left mirror to the right
1 and 2, 6 and 3
Left mirror to the left
2 and 3, 1 and 6
Left mirror up
2 and 3, 1 and 7
Left mirror down
1 and 2, 3 and 6
Right mirror to the right
1 and 2, 3 and 4
Right mirror to the left
2 and 3, 1 and 4
Right mirror up
2 and 3, 1 and 5
Right mirror down
1 and 2, 3 and 5

 

5 Installation is made upside-down.

Switches of the central facing section of the dashboard

 PERFORMANCE ORDER

1. Disconnect SRS. On the central facing section of the dashboard there is a switch of the alarm system, hours and the switch of heating of back glass (model since 1995 вып.).
2. Remove the facing panel (see. Head Body).

3. Having separated facing section from the dashboard, disconnect brought to the components built in in it electroconducting. Components fasten to the panel by means of screws. Check can be carried out without removal of elements.

4. An order of distribution of conductivity between plugs of sockets of switches see in schemes of electric connections.