Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
- Maintenance instruction
   Access, protection
   Elements of systems of safety of the car
   Car equipment, arrangement of devices and governing bodies
   Comfort
   Operation receptions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
9a1e70e9



Car equipment, arrangement of devices and governing bodies

The general scheme of an arrangement of governing bodies is presented on illustrations.

 


Combination of devices

The set of the main measuring instruments, control lamps and light indicators is included in a combination of devices of an instrument guard of the car.

Speedometer, odometer and counter of a distance in kilometers of the current trip

The speedometer specifies speed of movement of the car in km/h. below an axis of a display arrow the digital display which top field is taken away under odometer indications (the counter of complete run of the car), bottom - under indications of the counter of a distance in kilometers of the current trip is located.


Tachometer

Near the dial of a speedometer the index of turns of the engine, - a tachometer is located. The arrow of a measuring instrument shows to the driver frequency of rotation of a cranked shaft of the engine in rpm. Watch, that turns of the engine did not rise so that the arrow of the index came into limits of the range of a scale of a measuring instrument allocated with red color.


Measuring instrument of temperature of cooling liquid

The measuring instrument registers temperature of cooling liquid of the engine. Indications of a measuring instrument can vary depending on ambient temperature and driving conditions. At an exit of an arrow of the device out of limits of a range of admissible values of a scale, it is necessary to stop immediately movement and let's to the engine cool down. Long operation of the peregrety engine can lead to an exit it out of operation.


Fuel consumption measuring instrument

The measuring instrument of fuel consumption specifies the current level of fuel in a tank. During the braking, accelerations, commission of maneuvers and car movement on the inclined plane of the indication of a measuring instrument can vary slightly. The scheme of connection of a measuring instrument such is that it continues to give out working value even at the switched-off ignition. When lowering level of fuel in a tank to critical value the control lamp works built in in the measuring instrument dial.


Control lamps and alarm buzzers

The whole complex of control lamps by means of which the driver receives important information on serviceability/violation functioning of the main units and car systems is built in assembly of a combination of devices of the car. Below information on a principle of functioning of each of the provided light indicators separately is offered to attention of the reader.

Designations of control lamps and light indicators

Designation of a control lamp Purpose of a control lamp, (color)
AIR BAG Control lamp of safety cushions (SRS) (red)
Control lamp of level of brake liquid (red)
Control lamp of a charge (red)
Control lamp of leaky closing of doors (red)
Control lamp of pressure oils (red)
Control lamp of raising of the parking brake (red)
Control lamp of the minimum stock of fuel (yellow)
Control lamp of ABS (orange)
Control lamp of low level of liquid in a tank of a smyvatel (orange)
Control lamp of a condition of operation of the engine (orange)
O/D OFF The indicator of shutdown of a raising broadcast (orange)
Indicator of inclusion of back antifog lamps (orange)
Indicator of inclusion of a driving beam (dark blue)
CRUISE Control lamp темпостата (green)
Light indicator of inclusion of indexes of turns (green)

Check of serviceability of lamps


1. Cock the parking brake and include ignition (the engine do not start), - on an instrument guard control lamps of a charge, pressure of oil and an engine condition should light up

Also should join quickly and soon go out a control lamp of ABS and SRS

AIR BAG

2. If any of the listed lamps does not work, therefore it failed, or there was a break in a chain of its electroconducting. Try to reveal and eliminate a cause of failure.

Control lamp of a charge of the storage battery

The control lamp of a charge should light up at inclusion of ignition and die away right after engine start. Inclusion of this control lamp at the working engine warns the driver about violation of serviceability of functioning of system of a charge, i.e., the storage battery passes to a category mode. It is necessary to switch off at once everything consumers of the electric power on which functioning safety of traffic does not depend and to try not to allow останова the engine as attempt of its restart can lead to the final category of the battery. The car should be driven away at once on the next car repair shop for carrying out diagnostics of refusal and performance of necessary regenerative repair.


Control lamp of pressure of impellent oil

The control lamp of pressure of impellent oil should light up at inclusion of ignition and die away right after engine start. The lamp blinking at the working engine testifies to pulsatsionny decrease in working pressure of engine oil in the engine. Transition of the indicator to a mode of a constant luminescence says that pressure of oil fell to dangerously low level that is fraught with serious internal damages of the engine, up to its full exit out of operation. In both cases it is necessary to take urgent measures for correction of level of oil, identification and elimination of the reasons of pressure drop.


Control lamp of a condition of the engine

The control lamp quickly lights up at ignition inclusion. Its operation during any other time testifies to possible malfunction of one of systems of electric equipment of the power unit. In the absence of visible signs of refusals of functioning of systems of the power unit and decrease in dynamics of the vehicle, fixed by inclusion of a control lamp of violation the increase in fuel consumption or increase of toxicity of emissions can be at the bottom. Ignoring of signals of a control lamp is fraught with serious damages of the engine, up to a unit exit out of operation. At operation of a control lamp under way it is necessary to stop immediately movement, to park in a safe place and to muffle the engine, then, later small time, to make start, watching thus behavior of a control lamp. If the lamp did not return to a normal mode of functioning and continues to burn, the car should be driven away on the next car repair shop for carrying out detailed diagnostics and performance of necessary regenerative repair. Before elimination of malfunction of systems of the engine try to move with moderate speed, avoiding sharp dispersals with complete squeezing of a pedal of gas.

Even if at engine restart the control lamp comes back to a normal mode (i.e., dies away), it is necessary to address at the first possibility for consultation on car repair shop, especially if such turning on of the indicator occurs not for the first time.

Continuation of operation of the car with the included control lamp of a condition of the engine can lead to premature failure of the catalytic converter. Remember that on refusals and the damages which have resulted operation of the car with the included control lamp, guarantee certificates of manufacturer н6е extend!

Besides described above functions, on models with the corresponding complete set this control lamp carries out also a role of a control lamp of anticreeping system NATS V2.0.

Control lamp of inclusion of a driving beam

This light indicator lights up at the same time with inclusion of a driving beam of head headlights of the car (see below).


Control lamp of inclusion of back foggy lamps

This light indicator confirms serviceability of functioning of back foggy lamps at their inclusion.


Control lamp of level of brake liquid

Operation of this control lamp informs the driver on critical decrease level of hydraulic liquid in brake system.


Control lamp of raising of the parking brake

This control lamp continuously burns when raising the parking brake, reminding the driver of need of his otpuskaniye before a start of motion. Movement with the cocked parking brake leads to a fast overheat and failure of brake mechanisms of back wheels of the car and premature wear of protectors of tires of back wheels, and, besides, can become a cause of infringement of serviceability of functioning of system of anti-blocking of brakes (ABS) (see below). One of the possible reasons of gradual decrease in level of brake liquid is normal wear of frictional overlays of brake shoes. At operation of a control lamp the car should be driven away on the next car repair shop for an assessment of a condition of blocks and check of tightness of a hydraulic path of brake system.

Short-term operation of a control lamp occurs also at ignition inclusion (even at the released parking brake).


Control lamp of ABS

At the corresponding complete set of the car this control lamp lights up at inclusion of ignition and dies away right after implementation of start of the engine, confirming with that serviceability of functioning of a contour of system of anti-blocking of brakes. Operation of a control lamp in any other situations testifies to identification by system of self-diagnostics of violations in ABS contour. The car should be driven away immediately on the next car repair shop for carrying out detailed diagnostics of system and performance of necessary regenerative repair.

At operation of a control lamp the system of anti-blocking of brakes is disconnected, however brake mechanisms of the car continue to function in a usual mode, providing a vehicle adequate braking.


Control lamp of system of additional safety (SRS)

This control lamp lights up at inclusion of ignition and should die away right after implementation of start of the engine. If the lama continues to burn at the working engine (in a constant or flashing mode), it indicates existence of malfunction of components of SRS system. At the corresponding complete set operation of this control lamp can be the testimony of malfunction in contours of lateral safety cushions, or devices of automatic emergency natyazhitel of seat belts.

Control lamp of inclusion темпостата

CRUISE

At the corresponding complete set of the car this control lamp lights up at inclusion of system of automatic control by speed of movement of the car (темпостата) (see below).


Control lamp of leaky closing of doors

The luminescence of this control lamp warns the driver what not all doors of the car are densely slammed.


Light indicator of indexes of turn

The indicator confirms the fact and serviceability of functioning of indexes of turns of a vehicle and works in a flashing mode with the frequency corresponding to frequency of a blinking of indexes. The speeded-up blinking of the indicator usually testifies to a peregoraniye of a lamp of one of indexes of turns. It is necessary to make replacement of the burned-down lamp at the first possibility not to create emergencies on roads.

The blinking of this indicator usually accompanies also turning on of the alarm system.


Control lamp of the minimum stock of fuel

This control lamp joins, when in a fuel tank there are less than 9.0 l of fuel and warns the driver about need urgently to make car filling.


Control lamp of shutdown of raising transfer

O/D OFF

This control lamp joins at transfer of a key of the switch of raising transfer to the situation OFF.


Alarm buzzer “Take out a key from the ignition lock”

The buzzer works when opening a driver's door of the car at the key forgotten in situation ASS or LOCK in the ignition lock.

Alarm buzzer “Do not forget to switch off a headlight”

The buzzer works when opening a driver's door at outstanding head headlights.

The governing bodies located on a steering column, on the control panel, the central and ceiling consoles

The scheme of an arrangement of some of governing bodies is presented on an illustration

.


Left combined podrulevy the switch of management of functioning of external lighting/alarm devices


Inclusion of running fires and passing/driving beam of head headlights

1. The main switch of management is executed by lighting in the form of the lever which has been built in in the left part of a steering column directly under a steering wheel.

2. For turning on of devices of external lighting turn the face handle of the lever of the main switch in the first fixed situation. Thus there will be an inclusion of lobbies and back marker lights, lamps of illumination of registration plate and dashboard illumination. For inclusion of a passing beam of head headlights it is necessary to turn the face handle of the main switch in the second fixed situation.
3. Short-term switching of head headlights from a passing beam on distant also is back made by procrastination of the lever of the switch on itself. For continuous inclusion of a driving beam it is necessary to take away the lever from itself before click, then to release.

Short-term inclusion of a driving beam is made irrespective of, in what situation there is a rotary face handle of the main switch.

4. Some from models of cars considered in the real Management are equipped with system of automatic inclusion of running fires of light time of day (DRL). Day lighting joins and switched off automatically at ignition key turn in the situation "ON", its switching off can be made by a way of turn of the face handle of the central switch of lighting to the first or second fixed situation.

Inclusion of indexes of turns


1. Inclusion of indexes is made by means of the lever of the main switch of lighting. The lever is transferred up or down, to dependences of the chosen direction of a change of course. At transfer of the lever to extreme top/bottom situation (before click) the corresponding indexes of turns will continue to function until the steering wheel will not be returned in rectilinear situation.
2. Short-term inclusion of indexes, for example, at intention to replace a movement ryadnost, is made by easy procrastination of the lever up or down, respectively.

Inclusion of antifog lighting

Antifog lighting should be used only in the conditions of poor visibility!

1. Inclusion/switching off of fog lights is made by turn in the relevant position of the ring switch on the handle of the lever of assembly of the left combined switch.

Running fires should be included.

2. Inclusion of back foggy lamps also is made by means of the ring switch. Running fires also should be included.


Right combined podrulevy the switch

Switch of management of functioning of cleaners of a windscreen


Inclusion of cleaners/washers of a windscreen can be made only at the included ignition (situation ON and ASS). The choice of modes of functioning of screen wipers is made by moving of the lever of the switch down/up. Parameters of an interval mode of functioning of screen wipers (in a range 2-20) can be chosen by means of the face handle on the lever end.

It is not necessary to include washers further than for 30 seconds. It is not necessary to make attempts of inclusion of washers at a devastation of the tank of system. Screen wipers should be included in frosty weather only after the windscreen will be heated-up.


Podruleva switch of management of functioning темпостата

Main switch of a control system in the speed


The control system of speed (темпостат) enters into a standard complete set of some models, on others can be established in addition. The system allows to support automatically the chosen cruiser speed of movement of the car without impact on a gas pedal. Cruiser speed should not exceed value of 40 km/h. Application темпостата becomes especially convenient at long movement on the low-loaded direct country highways. For the purpose of safety it is not recommended to include темпостат at movement in the city, on twisting, abounding with turns, to roads, on a slippery paving, in a heavy rain or at other adverse weather conditions. In the cases listed above the driver should have possibility completely to supervise a mode of movement of the car.

Misuse темпостата can be at the bottom of a road accident. Include a control system of speed only at movement on free highways and under favorable weather conditions. During functioning of system there can be an automatic moving of a pedal of gas which thus should not be held a foot in order to avoid damage of basic and axial mechanisms.

The lever switch of management темпостата is located functioning on the right over a steering column, assemblies of the right combined podrulevy switch are lower. Inclusion/switching off of system is made by means of the handle of the lever of the switch of the button built in in an end face and accompanied by operation of the corresponding control lamp on the car dashboard.


Regulator of brightness of illumination of the dashboard

The regulator of brightness of illumination is built in in the car dashboard more to the right of a steering column. Demanded intensity of illumination of the panel is made by potentiometer rotation.

The regulator starts to function only at included running fires (see above).


Regulator of correction of the direction of optical axes of head headlights

The regulator is on the central console of the car between keys of switches of heating of seats and provides possibility of correction of the direction of optical axes of radiation of head headlights in a mode of a passing beam and to achieve the best conditions of illumination of the road at various loading of the car.

Adjustment is made depending on number of passengers, existence and weight of cargo in a luggage compartment. It is necessary to transfer a regulator to the situation which is corresponding to the actual loading of the car or most approached to it:

a) Situation "0" - one driver or the driver and the passenger on a forward seat;
b) Situation "1" - the driver and four passengers on forward and back seats;
c) Situation "2" - the driver, four passengers on forward and back seats, plus cargo about 185 kg in a luggage compartment (the full mass of the car is in limits of an admissible range);
d) Situation "3" - one driver and cargo about 380 kg in a luggage compartment (loads of forward and back axes of the car are in the admissible limits, the full mass of the car does not surpass the maximum admissible value). Also at trailer towage.

Heating of seats

1. Forward seats of the car are equipped with the built-in heaters. Switches of management are located heating of seats on the central console of the car.

2. Start the engine, - inclusion of heating of seats at the muffled engine leads to the fast category of the storage battery.
3. As the selector button choose a demanded mode of intensity of heating (LO - weak intensity or HI - the maximum intensity). On the button the corresponding indicator should be highlighted. Management of functioning of a heater is carried out automatically by means of the thermostat. Do not forget to switch off heating before leaving the car.
4. Do not cover a seat with heatinsulating materials, such as blankets, padded stools or dense covers. Do not put on seats firm or sharp subjects, try not to damage an upholstery and the heating element located under it. Any liquid spilled on a seat immediately collect dry rags. Do not apply to cleaning of an upholstery of seats any solvents, - use soft детергентами. In default functioning of a heater address for the help in car-care center.

Switch of the alarm light system


1. Turning on of the alarm system is made by an otzhimaniye of the push-button switch which has been built in in the central part of the dashboard of the car (under deflectors of the central air lines of ventilation/heating of salon) and usually equipped with a control lamp with the pictogram representing two entered one in another of triangles.

2. Turning on of the alarm system leads to simultaneous operation of all four indexes of turns (and their control lamp on an instrument guard of the car) the Alarm system is intended for the prevention of other participants of traffic of the compelled stop of the car and is used also in other dangerous situations provided by traffic regulations.

At the switched-on alarm system indexes of turns will not function!


Management of functioning of a drive of the top hatch

1. The electric drive of the top hatch functions only at the included ignition.

2. The control panel is located functioning of the electric drive of the top hatch on the ceiling console of the car.

3. To shift a cover of the hatch wring out a key of the switch of the panel designated by the pictogram and hold her in this situation. Closing of the hatch is made by means of the switch designated by the pictogram.
4.Для transfer of a cover of the hatch to inclined situation at first completely close it, then wring out and hold a key of the switch designated by the pictogram. Lowering of a cover is made by means of the switch designated by the pictogram.
5. In addition top hatch is equipped with a sun-protection shtorka. When moving a cover of the hatch the shtorka is cleaned automatically.
6. Watch, that passengers were not put out in the hatch during car movement. Before opening of the hatch clear a cover of moisture, snow, a dust and other extraneous deposits. Do not put on a cover of the hatch and a surface of a roof of the car near the hatch any heavy subjects.


7. At failure of the electric drive the cover of the hatch can be transferred to a closed position manually. Remove control panel facing by the electric drive, - access to an end face of a shaft of the driving electromotor should open. Using a prutkovy key of the suitable size, turn a shaft clockwise until the hatch cover completely will not be closed. For cover lowering from inclined situation turn a shaft counter-clockwise. For elimination of causes of failure of the electric drive address on car repair shop.


Electric adjustment of external rear-view mirrors


1. Assembly of management by functioning of the electric drive of external rear-view mirrors is built in in the car dashboard, to the left of a steering column. Adjustment of mirrors is made by means of polzunkovy and keyboard switches of the panel as follows:

a) Include ignition (the provision ON and ASS of a key);
b) Moving a rychazhka of the polzunkovy switch to the left (L) or to the right (R) make a choice of a mirror subject to adjustment;
c) Pressing the top, bottom, left or right sectors of the keyboard switch, make correction of provision of the chosen mirror;
d) After the completion of adjustment of both mirrors transfer a rychazhok of the polzunkovy switch to average situation in which the adjusting button does not operate. It is necessary in order that by casual pressing the button not to break adjustment of external mirrors.

2. Possibility of folding of mirrors in parking situation is provided also. For this purpose press on a mirror in the direction "back".


Switch of electroheating of back glass / external rear-view mirrors

1. Inclusion of electroheating allows to remove from surfaces of back glass / door rear-view mirrors of condensate, hoarfrost, and even thin fly. At inclusion of an electroheater the light indicator lights up built in the switch button. Shutdown of heating is made by repeated pressing the button.

2. The threadlike grid of a heating element of a heater is pasted on an internal surface of back glass and demands care in the address, - try not to damage a grid when wiping glass. Wiping should be made only along heater threads.
3. Functioning of a heater is interfaced to the raised level of power consumption therefore, in order to avoid a podsadka of the storage battery, the timer making automatic shutdown of system after 15 minutes of its continuous work is switched on in a chain of management of the device.
4. Do not forget to check before a start of motion quality of the review through back glass of the car.

Electric drive of external rear-view mirrors

Assembly of management by functioning of the electric drive of external rear-view mirrors is built in in the car dashboard, to the left of a steering column. Adjustment of mirrors is made by means of polzunkovy and dzhoystikovy switches of the panel as follows:

a) Include ignition (the provision ON and ASS of a key);
b) Moving a rychazhka of the polzunkovy switch to the left (L) or to the right (R) make a choice of a mirror subject to adjustment;
c) By means of the dzhoystikovy switch make correction of provision of the chosen mirror;
d) After the completion of adjustment of both mirrors transfer a rychazhok of the polzunkovy switch to average situation in which the adjusting button does not operate. It is necessary in order that by casual pressing the button not to break adjustment.


Electric drive of window regulators

The electric drive of window regulators functions only at the included ignition. For lowering-podnimaniya of glass use the corresponding individual switch. Possibility of management by window regulators of all doors from a driver's place is provided. The button allowing the driver to block regulators of all passenger doors is also provided. For shutdown of blocking press the blokirator button repeatedly. For lowering / поднимания glasses press a key of the corresponding switch and hold her in this situation.

Possibility of machine translation of glass of a driver's door in one of extreme provisions (completely openly, or it is completely closed) is provided, rather quickly to press the AUTO button of the control panel of a driver's door. To suspend process of opening/closing of glass press the button repeatedly.


Switch of cleaners/washers of lenses of head headlights

The push-button switch is built in in the central section of furnish of the dashboard of the car between the switch темпостата and a control lamp of the anticreeping alarm system. Operation of system occurs only at the included ignition. Liquid moves on lenses of headlights from this the tank, as on a windscreen, - periodically check its level.

Inclusion of washers at the empty tank is fraught with failure as a result of an overheat of the electromotor of a submersible pump!


Management of functioning темпостата

It is not necessary to use tempostaty at movement on the loaded roads, on a serpentine, in hilly and mountain districts, at a slippery paving and a strong wind.

1. The control system of speed (темпостат) provides possibility of automatic maintenance of speed of movement of the car in a range from 48 to 160 km/h without use of a pedal of gas.
2. For inclusion темпостата transfer located on the car dashboard to the left of a steering column the main switch to the situation ON.

3. Disperse the car till demanded speed and press the SET/COAST button control panels functioning темпостата, - on the display of the onboard processor CRUISE inscription should light up.

4. Clean a foot from an accelerator pedal. The system will automatically support the chosen cruiser speed of movement of the car.
5. For commission of overtaking squeeze out a gas pedal. After the pedal will be released, the car will return to chosen earlier cruiser speed.
6. At movement under a bias or uphill темпостат does not provide maintenance of cruiser speed of movement of the car and it should be switched off.
7. Cancellation of the chosen cruiser speed can be made in three various ways:

a) Press the CANCEL button (Cancellation), - the inscription of CRUISE should go out;
b) Slightly squeeze out a pedal of a foot brake, - CRUISE inscription
c) Use the main switch темпостата, - should go out an inscription of CRUISE and built in in a switch key a control lamp.
8. If at the pressed ACCEL key of the control panel squeezing of a pedal of a foot brake was made, it is necessary to disconnect темпостат the main switch and to activate it repeatedly after a set of demanded speed of movement.
9. Tempostat is disconnected automatically at decrease in speed of movement of the car to value of 13 km/h
10. Switching off of a control system by speed can be made also by a way of squeezing of a pedal of coupling (model with RKPP) or movings of the lever of the selector to the situation "N" (models with AT).
11. Increase of cruiser speed of movement of the car can be made in three ways:

a) Squeeze out an accelerator pedal when the car will be dispersed till demanded speed press and release the SET/COAST button on the control panel;
b) Press and hold pressed the ACCEL button on control panels functioning темпостата. Release the button when the car will be dispersed till demanded speed;
c) In short-term pressing the ACCEL button it is possible to make step acceleration of the car with a step of 1.6 km/h.
12. For fall of cruiser speed:

a) Slightly press a pedal of a foot brake. When speed of movement of the car will decrease to demanded value, press the SET/COAST button;
b) Press and hold the SET/COAST button pressed until the car will not be braked till demanded speed;
c) In short-term pressing the SET/COAST button it is possible to make step decrease in value of cruiser speed of the car with a step of 1.6 km/h.
13. For return to earlier chosen cruiser speed quickly press the RESET button. As soon as the car will be dispersed over 48 km/h, темпостат will automatically finish it to chosen earlier cruiser speed of movement which will support further.

Lever of a clamp of an adjustable steering column

See information concerning the correct and safe provision of a steering column.

1. Situation the helmsman of a column on cars of the corresponding complete set can be adjusted at the discretion of the driver. Adjustment is carried out before a start of motion.

The helmsman of a column during movement can lead performance of correction of situation to control loss over management of a vehicle and can lead to serious road accidents!

2. To adjust the provision of a steering column on height it is necessary:

a) To lower the lever of a clamp of a steering column located at the left under a steering wheel against the stop;
b) Adjustment of provision of a steering wheel on height is carried out by its moving to a demanded position in the vertical plane. Correctly adjusted steering wheel should not block the review of an instrument guard;
c) On termination of adjustment fix a steering column, having completely returned the clamp lever to a starting position;
d) Check reliability of fixing of a column, having tried to move it up and down.


Lever of the parking brake

For raising of the parking brake completely lift up the lever located between forward seats. Otpuskaniye of the parking brake is made as follows: tighten the lever up a little, press the button of a clamp located at an end face of the handle, then lower the lever down. At an otpuskaniye of the parking brake the corresponding control lamp which has been built in in an instrument guard of the car, should go out (see above in this Section).

Movement with the cocked parking brake can lead to failure of brake mechanisms and bearings of naves of back wheels!


Lever of the switching/selector of transfers

Models with RKPP


The lever of gear shifting of RKPP is located on the central console of the car. From above on its handle the gear shifting scheme is put.


Models with AT

The lever of the selector of transfers of AT is located also on the central console of the car. Sideways on the handle of the lever there is a button of shutdown of blocking which should be squeezed out when switching transmission in the provisions "R", "R", "2" and "1".

Below the button of shutdown of blocking the switch of raising transfer is located (About/D). At a nazhimaniye on the About/D button there is a shutdown of raising transfer (the control lamp at the same time lights up "About/D OFF"). For inclusion About/D repeatedly press the button.

Raising transfer functions only at the heated-up engine to normal working temperature. At included темпостате the button of shutdown of raising transfer ceases to operate.

On models from AT possibility of a choice of modes of functioning of transmission is provided. The button of switching of modes is located on the central console of the car, to the left of the lever of the AT selector and allows to choose one of three following modes: CAR, SNOW and SPORTS (Receptions of operation for more details see in Section).


Adjustment of seats

Forward seats

Seats with a manual drive


1. In the Section Elements of systems of safety of the car important information on safety issues and correctness of adjustment of seats, their backs and head restraints is stated.
2. Before a start of motion adjust the provision of a seat.

3. For adjustment of provision of a seat in the longitudinal direction pull up a bracket located in front under a pillow of a seat and, holding her in the lifted situation, shift seat assembly forward or back in situation convenient for you. Release a bracket, for check of reliability of fixing of a seat try to shift it forward and back.
4. To change a tilt angle of a back of a seat, pull it forward, raise the lever located sideways on the basis of a pillow of a seat from a door, then, holding the lever in the lifted situation, adjust a back inclination. Back fixing in new situation occurs automatically after a lever otpuskaniye.

5. Some options of execution of the car provide possibility of adjustment of height of a pillow of a seat. Adjustment is made by means of two handles located on the outer side of a pillow.


Models with the electric drive of adjustment of provision of a driver's seat

1. The electric drive of adjustment of provision of a driver's seat enters into a complete set of some models. The control panel with two switches is located electric drive functioning on the left lateral surface of a pillow of a seat. The combined extended polzunkovy switch serves for adjustment of provision of a seat in the longitudinal and vertical directions. By means of the switch of the smaller size adjustment of an inclination of a back is carried out.

2. Adjustment of a seat can be carried out at any provision of a key in the lock of ignition and should be carried out prior to the beginning of movement.
3. For correction of provision of a seat in the longitudinal direction shift in the relevant party the extended polzunkovy switch on the control panel electric drive functioning.

4. Adjustment of height of provision of forward and back edges of a pillow of a seat is carried out by an otzhimaniye in the relevant party of the forward or back ends of the polzunkovy switch (1). Adjustment of height of provision of a pillow is assembled made by shift up or down all switch.

5. Adjustment of an inclination of a back is carried out by means of the switch of the smaller size (2) located behind the first extended switch.

6. Adjustment of size of a bend of lumbar department of a back (at the corresponding complete set) is made by means of the lever, located assembly on a seat back.


Electroheating of seats

On some models possibility of heating of forward seats (see above) is provided.

Do not include heating of seats at the idle engine and try not to use it long time at operation of the engine on single turns in order to avoid a discharge of the storage battery.


Back seat

On some models the back seat is equipped with the central armrest. The armrest settles down in the central part of a seat and is displayed by extraction from a niche in a back and lowerings in horizontal situation. After lowering of an armrest access to a luggage compartment of the car opens.


Head restraints

Head restraints help to prevent injuries of a neck and the head at car blow behind. In order that head restraints could carry out effectively the protective functions, they should be adjusted correctly. Adjust head restraints on height so that the top part of a pillow of a head restraint was flush with the upper edge of an auricle. If high passengers do not manage to achieve performance of this condition, it is necessary to establish a head restraint in the highest situation.

On some updatings of the car possibility of adjustment of head restraints on height and a tilt angle is provided. Adjustment of provision of a head restraint is made by two hands at the same time therefore it is not necessary to try to adjust a head restraint during car movement. To lift a head restraint, simply pull it up, for lowering, press on it; change of a tilt angle of a head restraint is made by its bending back in the relevant situation.

Some options of execution of the car provide existence of a push-button clamp of a head restraint. At such design to lift a head restraint, it is rather simple to pull it up, lowering can be made only after an otzhimaniye of the button of a clamp.

Adjustment of a tilt angle of a head restraint is made manually.


Rear-view mirrors

For the purpose of ensuring adequacy of the review of a zone behind the car it is necessary to support constantly purity and to check correctness of adjustment internal and external rear-view mirrors. Before a start of motion, make sure that rear-view mirrors are adjusted properly.

Internal rear-view mirror


Two regular provisions of an internal rear-view mirror are provided: one is intended for movement during daylight hours, another - in dark. In the second situation reflecting ability of a mirror decreases that promotes weakening of blinding action of headlights moving behind vehicles. Transfer of a mirror of day situation in night also is back made by means of special, built in in assembly from below a rychazhka. Pressing a rychazhok forward or back, choose the demanded provision of a mirror.


External mirrors

The principle of functioning of the electric drive of external rear-view mirrors is stated in the second subsection of this Section (see above).

Possibility of folding of mirrors in parking situation is provided also. To clean a rear-view mirror in parking situation simply press it to glass of a door of the car.


Hours/thermometer

Hours are built in in the top part of the central section of the dashboard and function only at the included ignition, or in the provision ASS of a key.

Installation of hour indications is made by means of the button "N", minute - by means of the button "M".


After battery shutdown hours are automatically nulled and are subject to control.

At shutdown of illumination of the dashboard brightness of a luminescence of the indicator of hours decreases.


The display of hours is used also for highlighting of indications of a measuring instrument of temperature of external air the switch of a mode of functioning of the display is located at the left on assembly of hours.

Display of the onboard processor

At the corresponding complete set of the car the display of the onboard processor is built in in the tachometer dial. At the included ignition it is possible to choose one of possible modes of functioning of the display. The chosen mode is specified by the special cursor, in the form of a triangle. The display can be used for highlighting of time, temperature of external air, distance which can be passable without refueling, length of the passable way, time in a way, average speed of movement and average fuel consumption.

Switching of modes of the display is carried out by the special button.


Air temperature is defined in degrees Celsius. When lowering temperature below 3°С the display is automatically switched in a thermometer mode, thus its indications start to blink, drawing of attention of the driver. In pressing of the switch of modes the display comes back to an initial mode. At temperature below 4°С the cursor of the thermometer continues to blink continuously.

At inclusion of a mode of highlighting of distance which can be passable without refueling, indications of the display change each 30 seconds. Function of automatic switching of the display on reaching a critical minimum stock of fuel is provided. Display indications thus also blink, drawing of attention of the driver. The cursor will continue to blink until the car will not be filled. At further decrease in level of fuel of the indication of the display are nulled and on a board value is highlighted “----”.

At inclusion of a mode of highlighting of the passable distance the indication of the display can be dumped by a way of keeping of the switch pressed during 1 second. The indication of time of stay in a way (see further) will be at the same time dumped.

For dumping of the indication of time it is necessary to hold the button of the switch in a way pressed during not less than 1 second. Indications of size of the passable distance are at the same time dumped.

In a mode of average fuel consumption of the indication of the display each 30 seconds change. For dumping of indications it is necessary to hold the button of a pereklchyuatel pressed during й seconds. During the first 500 meters of movement after dumping of indications on the display value will be highlighted “----”.

In a mode of average speed of movement the indication of the display will change also each 30 seconds. Dumping of indications is carried out by second keeping of the pressed button of the switch. Within the first 30 seconds after dumping of indications on the display value will be highlighted “----”. Dumping of value of average speed lead also to zeroing of the indication of average fuel consumption.

Card holder and coaster

The card holder and coaster are built in in assembly of the central console behind a control lever of the parking brake.


Using the holder, be careful, - try not to burn and not to burn other passengers hot drinks. Keep in mind that many drinks can spoil appearance of floor rugs, upholsteries of seats and internal panels of doors. Hit of splashes of liquid on electric contacts can become the reason of failure of electric equipment of salon.

Ware box of the central console

In a forward part of the central console, under assembly of an audiosystem the small ware box intended for storage of small subjects is built in. There are two designs of a small ware box - sliding and leaning back.


Lighter and ashtrays

The lighter functions only at two provisions of a key in the ignition lock: “ACC” or “ON” when ignition or a food of auxiliary consumers of the electric power is included. For turning on of the lighter drown before click its button. After heat of a spiral the button automatically with click will return to a starting position.

In order to avoid a lighter exit out of operation, do not hold its button during spiral heating!


The forward ashtray is incorporated about uniform assembly with the lighter, back is located under assembly of the central armrest.

Sun-protection peaks

Two harmonious sun-protection peaks are located over the upper edge of the wind flew down the car and serve for protection of eyes of the driver and the forward passenger against hit of direct sunshine. If beams fall in front, the peak should be lowered simply, having turned it on axial loops down. For protection against light falling sideways, the peak should be liberated from an internal loop and to develop towards a door. In case of need the peak can be extended with a way of a pulling of an additional guard.

The pulling of an additional guard in the first provision of a peak can lead to rear-view mirror closing!


Toilet pocket mirror

The toilet pocket mirror is established in a sun-protection peak and protected by a cover.

Devices of illumination of salon


Main salonny lamp


1. The switch of the forward (main) salonny lamp has three fixed situation. In situation "0" illumination of salon joins when opening any of salon doors.


2. The built-in timer provides automatic inclusion of lighting for 30 seconds in the following cases:

a) When at the taken-out ignition key the driver's door is not locked;
b) When at the closed driver's door the key is taken from the ignition lock;
c) When at the taken key the driver's door opens, and then again is closed.
3. Automatic shutdown of lighting on the timer is carried out when locking a driver's door and at ignition key turn in the situation ON.

Lamps of local lighting

In the ceiling console of the car two directed individual lamps are built in also. Switches of individual lamps are located near plafonds of the corresponding lamps (left and right). For turning on of the lamp press the button of the corresponding switch. For switching off of lighting press the same button repeatedly. Individual lamps function at any provision of a key in the ignition lock.


Illumination of the lock of ignition

On some models illumination of the lock of ignition is provided. Illumination joins when opening a driver's door and continues to burn within several seconds after its closing.

Nest of selection of capacity


The nest of selection of capacity is intended for power supply giving to auxiliary electrodevices. The key should be turned in the situation ON or ASS.

Tension of the onboard power supply makes 12 volts, do not connect to a nest of selection of capacity consumers with parameters over 12 In/120 W. Not used socket should be closed a special cover.