The device, service, Nissan Maxima QX repair - Comfort//Maxim's Nissan (from 1993 g) accessories-sale.ru

Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
- Maintenance instruction
   Access, protection
   Elements of systems of safety of the car
   Car equipment, arrangement of devices and governing bodies
   Comfort
   Operation receptions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
9a1e70e9



Comfort

Systems of heating, ventilation and air conditioning

At the correct use of possibilities of systems of heating and ventilation in salon of the car comfortable conditions of stay are provided and the zapotevaniye of glasses is excluded.

If the car upon purchase was not equipped with air central air, it can be mounted and established during any time convenient for the owner, - address at Nissan company car repair shop.

Control panel functioning of systems of ventilation, heating and air conditioning

The general view of the control panel with the indication of an arrangement of handles is presented on an illustration.

 


Switch of a choice of a high-speed mode of the fan

The switch allows to carry out a choice of a high-speed mode of rotation of the fan of the heater/conditioner of air. The switch has five provisions - OFF (Vykl) and 4 positions of various speed of rotation of a krylchatka.

Switches of a choice of the direction of distribution of air

By means of these push-button switches the choice of the direction of distribution of an air stream (the top level, foot wells, having blown in glasses and two mixed modes) is carried out.

Air temperature regulator

The Polzunkovy regulator allows to choose a demanded temperature mode of functioning of systems of heating/conditioning at the discretion of the operator. Shift of the handle of a regulator to the right leads to increase in temperature of the car of air submitted in salon, to the left - to reduction.

The button of a choice of a mode of the closed air circulation

By means of this button the choice of a mode of air circulation in salon is carried out. At the wrung-out button (situation OFF) in salon moves fresh external air. This mode is used at normal long work of a heater or К/В. When squeezing button (the control lamp built in inside should light up) the system passes to a mode of the closed air circulation in salon. Data the mode usually gets out at movement on strongly dusty or zagazovanny sites of the road, and also in case of need a fast ostuzheniye of air in salon the conditioner.

At long use of a mode of the closed circulation there is an air stagnation in car salon.


Switch of the conditioner of A/C air

The A/C button is intended for inclusion and switching off of the conditioner of air. For turning on of the conditioner start the engine, choose a demanded high-speed mode of the fan (situation 1 ÷ 4) and press the A/C button), - the control lamp built in in the button should light up. Shutdown of the conditioner is made by repeated pressing the button.

Management of deflectors

Nozzles of the central air lines of the dashboard are equipped with the special zhalyuziyny deflectors, allowing to regulate a deviation of a submitted air stream both in horizontal, and in vertical the planes. Management of deflectors is carried out by means of built in a lattice snuffled a rychazhka and the roller switch close to a lattice which design allows to disconnect supply of air completely.

Lattices of lateral air lines of the dashboard have a similar design.


Instructions on use of systems of ventilation, heating and air conditioning

Below detailed maintenance instructions of systems of heating, ventilation and air conditioning are provided in various climatic conditions. Information on is presented to attention of the reader how to provide effective ventilation, heating and air cooling in car salon, and also how quickly to remove from glasses condensate and hoarfrost.

All considered systems function only at the started engine. As a working body for a heater cooling liquid of the engine is used. If the engine is not heated-up to normal working temperature, some minutes before in salon warm air will start to move is required. Work of central air of air does not depend on temperature of cooling liquid of the engine.

In absolute majority of cases the best efficiency of functioning of the systems providing a comfortable microclimate, is reached in a giving mode in salon of external air. Long inclusion of a mode of the closed circulation, especially at the idle conditioner of air, leads to a zapotevaniye of glasses and increase of a spertost of air therefore it is recommended to include this mode only in case of need and for rather short time, for example, at movement on the district with the filled with smoke or polluted atmosphere. As soon as need of isolation of salon will disappear, giving in salon of fresh air should be renewed.

External atmospheric air arrives in heating and conditioning systems through the reception lattice located before a windscreen and equipped with a fairing. Periodically clean openings of a reception lattice from leaves and the other garbage complicating passing of air.

Ventilation of salon of the car

The system of a supply and exhaust ventilation provides a constant exchange of air in car salon. The fresh external air arriving through a forward reception lattice, circulates on salon and then is removed through the exhaust outlets located near back glass.
a) Take away in extreme left situation the handle of a regulator of temperature. Check, that the conditioner of air was switched off;
b) Choose a mode of distribution of the air, corresponding to the pictogram. The mode of the closed air circulation should be switched off;
c) Having chosen the corresponding high-speed mode of the fan, establish demanded intensity of supply of air in car salon.

Air cooling in car salon


Cooling of salon is made as follows:
a) Turn on the air conditioner, having pressed the A/C button, - the control lamp built in in the button should light up;
b) Track, that the handle of a regulator of air temperature was displaced in extreme left situation.
c) Choose the direction of the direction of distribution of the air, corresponding to the pictogram;
d) At high humidity of external air include a mode of the closed circulation, at low humidity, - a mode of inflow of fresh air;
e) Having chosen the corresponding high-speed mode of the fan, establish demanded intensity of supply of air in salon.

If the car staid a long time on the sun and air in salon strongly heated up, quickly to reduce temperature in salon as follows:
a) Start the engine;
b) Turn on the air conditioner (A/C button). Check, that the handle of a regulator of air temperature was displaced in extreme left situation;
c) Having chosen the corresponding high-speed mode of the fan, establish the maximum intensity of supply of air in salon;
d) Partially slightly open windows and choose the direction of distribution of the air, corresponding to the pictogram. Include a mode of inflow of fresh air.

After air temperature in salon will decrease to acceptable level, close windows and establish a normal mode of air conditioning (see above).

Work of central air of air leads to increase of load of the car engine therefore it is necessary to watch closely an arrow of the index of temperature of cooling liquid, moving with frequent stops and on small speed in the conditions of an intense city cycle, or overcoming long liftings of a considerable steepness. At approach of an arrow of the index to a red range of a scale, temporarily switch off the air conditioner until the temperature of the engine will not return to norm.

Heating of salon of the car


To lift air temperature in car salon, execute the following manipulations.
a) Start the engine;
b) Choose the direction of distribution of the air, corresponding to the pictogram. The mode of the closed air circulation should be switched off;
c) Having chosen the corresponding high-speed mode of the fan, establish demanded intensity of supply of air in salon;
d) Displacing the handle of a regulator of air temperature in this or that party, establish desirable degree of heating of air.

Salon heating with simultaneous drainage of air by means of the conditioner


At central air work humidity of air in salon of the car decreases, therefore simultaneous inclusion of systems of heating and conditioning allows to make air in car salon warm and dry.
a) Turn on the fan;
b) Turn on the air conditioner;
c) Choose the direction of distribution of the air, corresponding to the pictogram. The mode of a retsirkulyatsiya of air should be switched off.
d) Displacing the handle of a regulator of air temperature in this or that party, establish desirable degree of heating of air arriving in salon. In this mode cold air from the conditioner mixes up with warm air from a heater.

Joint inclusion of systems of heating and air conditioning can be applied in any traffic conditions when the temperature of air is higher 0°С.

Removal from condensate and hoarfrost glasses


To clear internal surfaces of glasses of the condensed moisture it is possible as follows:
a) Turn on the fan;
b) At the corresponding complete set of the car turn on the air conditioner;
c) Choose the direction of distribution of the air, corresponding to the pictogram. The mode of the closed air circulation should be switched off;
d) Establish the handle of a regulator of air temperature in such situation that through nozzles обдува a windscreen warm air moved;
e) Include an electroheater of back glass for faster removal of the condensed moisture from its surface. For switching off of the conditioner press the А/С button.

To remove from an external surface wind and lateral glasses hoarfrost or the ice formed after parking of the car on the street in frosty weather, execute the following manipulations:
a) Include ignition, having turned a key in the lock in the situation "ON";
b) Choose the direction of distribution of the air, corresponding to the pictogram. The mode of the closed air circulation should be switched off. Some options of execution of the car provide possibility of automatic inclusion of a mode of supply of fresh air and the conditioner, by the choice of the direction of distribution corresponding to the pictogram;
c) Displace the handle of a regulator of air temperature in extreme right situation (the maximum heating of air) and turn on the fan for the maximum speed;
d) Start the car engine.

For acceleration of cleaning of a windscreen from hoarfrost or ice it is recommended to include a mode of the closed air circulation in very cold weather at first. After the windscreen will be released from fly, renew supply of fresh air for the purpose of prevention of a zapotevaniye of glasses.

In a mode обдува glasses all submitted to salon of air arrives through the slot-hole nozzles located from above on the dashboard at the basis of a windscreen, and also via lateral ventilating deflectors of the dashboard. The air temperature, blowing glass, and speed of purification of glasses increase in process of engine warming up. For acceleration of process of removal from a windscreen of condensate, hoarfrost or ice it is possible to close lateral ventilating deflectors (see an illustration 4.10). In this case all air will go only on having blown in a windscreen.

For reasons of safety it is not necessary to begin movement until all windows of the car will not be cleared of condensate, and to the driver the adequate review will not be provided.

Switching off of systems of heating and ventilation


Temporarily to disconnect heating and ventilation systems, turn the handle of a regulator of air temperature in extreme left situation, establish the minimum high-speed operating mode of the fan.

Need for shutdown of systems arises in the first some minutes after engine start in cold weather as it provides faster warming up of the engine to temperature, sufficient for effective functioning of a heater. In all other cases keep the fan constantly included in avoidance of a stagnation of air in salon.

Climate control system

Appearance of the control panel of systems of heating, ventilation and conditioning equipped with system of climate control of models is presented on an illustration.


Start the engine and turn on the conditioner.

Automatic cooling and draining heating

In this mode the system automatically maintains in salon the set temperature regardless of fluctuations of temperature of external air. Distribution of streams of distribution of air and speed of rotation of the fan also are supervised automatically.

Press the AUTO button, - on the display the inscription of the corresponding contents should be highlighted.

By means of a key located to the left of the display of the control panel of a regulator set a demanded temperature mode.

Optimum about currents of sight of efficiency of functioning of system the temperature 25°С is considered.


The mode of automatic maintenance of temperature and adjustment of distribution of air is included.

Heating (economic mode)

It is not recommended to use this mode in case of a zapotevaniye of glasses.


In the K/V this mode does not work.

Press the button of inclusion of an economic mode (ECON), - on the display the inscription of the corresponding contents should be highlighted.

Choose a demanded temperature mode of system of heating.

In order to avoid failures in work of a heater it is not necessary to establish temperature below air temperature.


The mode of automatic maintenance of temperature and adjustment of distribution of air is included.

Condensate removal


1. Press the inclusion button обдува glasses - the control lamp built in in the button should light up.
2. Choose a demanded temperature mode.
3. For the accelerated removal of condensate and hoarfrost from the outer side of glasses choose the maximum high-speed mode of functioning of the fan.
4. As soon as a windscreen clear, press the AUTO button for return to an automatic mode of functioning of system.
5. At included обдуве and air temperature below 2°С there is an automatic switching of system in a mode of removal of condensate to shutdown of a mode of the closed circulation. Giving in salon of external air accelerates process of removal of condensate.

Manual control by speed of rotation of the fan


The manual choice of a high-speed mode of rotation of a krylchatka of the fan is made by means of the keyboard switch located to the right of the display. For return of system to an automatic mode press the AUTO button.

The button of inclusion of a mode of the closed air circulation


At inclusion of a mode of the closed circulation the control lamp should light up built in in the switch button. Shutdown of a mode is made by repeated pressing of the button.

Inclusion of a mode of the closed circulation becomes impossible at system installation on condensate removal.


Button of a manual choice of the direction of distribution of air ("MODE")

By means of this button one of the following four modes of distribution of air submitted to salon can be chosen:

a) Supply of air through air lines of the top level (the central and lateral deflectors of the dashboard);
b) Supply of air through air lines of the top level and in foot wells;
c) Supply of air in foot wells;
d) Supply of air in foot wells and on having blown in wind and lateral glasses.

Features of operation of system of climate control


At low ambient temperature and the cold engine supply of air in foot wells in the first 150 seconds after implementation of start of the engine is blocked and renews only after sufficient warming up of cooling liquid.

In the dashboard of the car the temperature sensor according to which indications it is carried out podderzhivany temperatures at the set level is built in. Try not to put near the sensor any subjects.


Audiosystem

Autoradio tape recorder


The radio tape recorder functions only at the included ignition (a key in the situation ON or ASS).

For the best reception of a radio signal it is necessary to put forward the aerial completely. Reception of a radio signal is influenced by capacity of transferring station and its remoteness, hindrances from buildings, bridges, mountains and other obstacles, - as a rule, short-term changes in quality of reception are caused by existence of similar hindrances.

Appearance of the control panel of the autoradio tape recorder entering into a standard complete set of Nissan Maxima cars is presented on an illustration. The radio tape recorder is equipped with the demountable forward panel.


The radio tape recorder includes a radio receiver of ranges of DV-SV-UKV and a cassette player of magnetic recording. Besides, the system includes the code security module and a CD player with the device of automatic change of disks. The tape recorder possesses high quality of reproduction thanks to use of the filter of noise of Dolby system.

System of double reception

Signal reception in VHF a range is often accompanied by the strong noise connected with good reflection of ultra-short waves from various obstacles. The system of double reception based on two aerials is applied to improvement of quality of reception. The first aerial represents the ordinary telescopic aerial. The second aerial - wire type - is pasted on back glass of the car. The system is automatically switched to that aerial which provides at present the best quality of reception.

Security system

For the purpose of minimization of risk of abduction the audiosystem is equipped with security system with use of a four-unit digital code. Without code input inclusion of a radio tape recorder is not obviously possible. At normal operation the audiosystem is not blocked and works as usual.

The security system works only at module extraction from the dashboard. To unblock the module it is possible only input of a certain code. The code is individual for each radio tape recorder, to change is not subject and it is specified in a special card which is put in ware ящичек on a place of assembly of the car. With a question of a site of a card it is necessary to address on Nissan car repair shop.

Store a card with a code of security system in a safe place, it is desirable out of the car. In case of loss of a card and absence of duplicating records of a code it is necessary to address on Nissan car repair shop.

Demountable control panel

For control panel removal, displace to the left the handle of its fastening.

Before leaving the car on parking parking it is recommended to put the panel in a case enclosed in a set and to take it with itself. The case is intended for panel protection from damages. For inclusion of a radio tape recorder establish the panel on the regular place. For carrying out maintenance of the demountable control panel at Nissan car repair shop it is necessary to show a card with a security code.

Removal of a security code

Attentively familiarize the instructions provided below and in accuracy follow all instructions.


1. For carrying out certain categories of maintenance of the car connected with shutdown of the storage battery, it is required to remove a security code of an autoradio tape recorder. If a code previously not to remove, at shutdown of a food there will be a system blocking.
2. Include a radio receiver, - on the display there should be “CODE IN” inscription (the code is entered).
3. Press any button (except “Щ”, “Ъ” and “PS/AS”), - on the display will be highlighted an inscription “0000”.
4. By means of buttons of control for the fixed radio stations gather on a board a demanded security code.
5. Press the button of input of the PS/AS code.
6. Press and hold buttons 1 and 4 of control for radio stations.
7. Switch off twice and again turn on the module with the pressed buttons 1 and 4 (ON-OFF-ON-OFF-ON).
8. At highlighting on the display after the last inclusion of a radio tape recorder of an inscription “0000” press any button (behind the exception “Щ”, “Ъ” and “PS/AS”).
9. By means of buttons of control for the fixed radio stations gather the corresponding security code.
10. Press the button of input of the code of "PS/AS", - on the display “CLEAR” inscription starts to blink, and at the same time there will be a turning on of the radio receiver/tape recorder.
11. Removal of a security code is complete.

At input of the incorrect code on a board remain to burn the entered figures, the receiver/tape recorder thus does not turn on. At each inclusion of a radio tape recorder after removal of a security code on the display it will be highlighted, and then to disappear “CLEAR” inscription. In order to avoid theft of the module of a radio receiver do not leave the car on parking parking at the remote code of the device of blocking.


Restoration of a security code

1. The code should be restored at once upon termination of procedures of maintenance of the car.
2. Switch off a radio receiver.
3. Press and hold pressed buttons 1 and 4 of control for radio stations.
4. Switch on and off a radio tape recorder at the pressed buttons 1 and 4, - on the display “CODE IN” inscription (the code is established) will be highlighted.
5. Now input of a security code is complete, the security system is activated.

Autoradio tape recorder unblocking

1. At shutdown of the storage battery for any reason leads to audiosystem blocking. After restoration of a food and turning on of the module on a board “CODE IN” inscription is highlighted. For unblocking of system and restoration of its working capacity do the following:
2. Include a food, on the display “CODE IN” inscription will be highlighted.
3. Press any button (behind the exception “Ъ”, “Щ” and “PS/AS”), - will be highlighted an inscription “0000”.
4. Gather a confidential code (see above).
5. Press the button of input of the PS/AS code, the system will be unblocked and there will be a turning on of the radio receiver/tape recorder. At input of the wrong code on the display the inscription is highlighted “----”. Wait about 10 seconds and repeat attempt of input of a code.

 The device of blocking is equipped with the protective mechanism limiting number of inputs of the wrong code. After the first and second unsuccessful attempts the system accepts the next input in 10 seconds. After input of the wrong code from 3 to 20 times the interval between inputs increases till 15 minutes. Further attempts lead to complete blocking of system then it is possible for unblocking only in at firm car repair shop of the Nissan company.


Code indicator

The burning bulb of the CODE indicator specifies that the security system of protection is in a ready state. Before leaving the car, it is necessary to check always readiness of security system on an indicator bulb. For inclusion of protection press the PS/AS button after performance of the following actions:

a) Switch off a radio receiver;
b) Switch off ignition;
c) Remove the control panel, - the indicator starts to blink. For shutdown of the indicator press the PS/AS button repeatedly.

Ruled system uses in a radio reception mode

Turn the handle food/loudness and press the button of inclusion of a radio receiver (TUNER). Be adjusted on desirable radio station. The handle of loudness adjust loudness. In handle pressing food/loudness it is possible to make inclusion/switching off of a mode of LOUD sounding. In a mode LOUDLY on a board “LOUD” inscription is shown.

Range choice

Switching of a frequency range (VHF/SV/DV) is made by means of the BAND button, on the display of the control panel designation of U, by M or L, respectively is highlighted.

Mode of manual control

For transition to a mode of manual control press the TUM And/m switch, - the control lamp should light up built in the switch button. The pressing of the Shch and Ü buttons changes frequency of an accepted signal to one step up or down. For continuous change of frequency hold the corresponding button of the pressed.

Mode of automatic control

For transition from a mode of manual control in a mode of automatic control press the TUM And/M switch. In an automatic mode the receiver is adjusted on the next radio station. At pressing of the Shch and Ü button of radio it is reconstructed on the following next radio station in a mode of local search (LOCAL). If in local area of frequencies the station is not found, the system makes sensitivity switching on a mode "DX", - the corresponding indicator should light up. If the station is not found also in a mode DX, the receiver starts to conduct continuous alternate search. Autosearch interrupts in TUM And/m switch pressing.

Function of storing of radio stations

The radio receiver allows to fix on six radio stations in each of ranges of frequencies. For this purpose do the following:
a) Be adjusted on desirable station;
b) Press and hold pressed more than 2 seconds any of buttons of control for radio stations, - reproduction should stop;
c) After completion of process of storing on the button of the chosen channel the indicator lights up, and reproduction renews;
d) Other channels are established similarly.

At shutdown of a food of a radio receiver or safety lock knocking-out memory of a radio receiver is erased. In this case it is necessary to repeat procedure of control for desirable stations.

Automatic storing of radio stations

1. For automatic storing of six radio stations press the button and take it more than 2 seconds. The button pressing for the period of less than 2 seconds establishes a mode of preliminary scanning of frequencies. For an identification of the fixed radio stations press buttons 1-6.
2. During procedure of storing of radio station on the corresponding button of the channel illumination of number of the channel and a control lamp blinks.
3. Function of automatic storing conducts search of stations at first in local area of frequencies, and then in a mode DX. If after two cycles of search in both modes less than 6 radio stations are found, procedure of storing stops, and the radio receiver passes to the frequency established earlier.

Sounding control

To achieve the maximum quality of sounding, adjust a sound timbre BASS and TREBLE handles.

Balance adjustment

Extend the handle food/loudness/balance and, rotating it, adjust balance of loudness between right and left loudspeakers.

Depth of a sound

The FADER handle adjust balance of loudness between lobbies and back loudspeakers.

Switching on a mode of reception of station of a road broadcasting (if is available)

1. For inclusion of a mode establish a range of VHF (U) and press the TP-VF button, - on the display “VF” inscription will be highlighted.
2. During translation of the program of road information the radio receiver is automatically switched to the relevant station of a broadcasting, and on the display "TR" inscription is highlighted, thus loudness of reproduction automatically increases. If at the moment of inclusion of a mode of a broadcasting of road information the tape recorder works, the pause automatically joins. Upon termination of translation cartridge playing renews.
3. In a mode of automatic control at the pressed TP-VF button the tuner accepts only those stations which broadcast at present the program of road information.
4. Inclusion of function of automatic storing at the pressed TP-VF button leads to fixing in memory of a radio receiver only those stations which broadcast at present the program of road information.

Ruled system uses in a mode of reproduction of magnetic recording

Establish the ignition key in the situation "ASS" or "ON" and press the button of an operating mode of the tape recorder (CONTAINER). Horizontally insert the cartridge in a kassetopriyemnik the open party to the right. After loading of a tape record reproduction will begin.

 It is not necessary to apply force at cartridge insertion! The button indicator "CONTAINER" shows the direction of rewind of a film. For the accelerated rewind forward press the button "Shch" which corresponds to the direction of movement of a tape. For rewind press the button "Ü" opposite to those which is shown on the indicator back.

Function of automatic search (APS)

1. The APS function allows to pass automatically by the beginning and the end of the current record.
2. For inclusion of the APS mode press twice the Shch or Ü button, - search of the beginning or the record end (the control lamp built in the button will burn) will begin.
3. At the pressed SCAN button (the built-in control lamp burns) the double pressing of the Shch"/button leads to start of function of preliminary listening forward or back.
4. The APS function can not work in the following cases:

a) Level of record is too low;
b) On a tape informal conversation is written down;
c) Intervals between records make less than 4 seconds;
d) Pauses between records the too long;
e) Record goes without intervals;
f) The pause is filled with a strong noise background.

Change of the direction of movement of a tape

Press the BAND/DISC/34 switch.

Function of search of the beginning of the following record

For repeated reproduction of the current record press the RPT button. During action of function of repetition on the button the built-in control lamp and RPT inscription burns.

System of suppression of noise of Dolby NR

If magnetic recording is coded on Dolby NR system, for elimination of high-frequency noise of a tape press the DOLBY NR button, - the control lamp built in the button will light up.

Filters of the Dolby NR brand are produced according to the Dolby corporation license. An inscription of Dolby NR and double D are trademarks of this corporation.

Function of search of the beginning of the following record

For transition to the beginning of the following record press the BLS button, - the control lamp built in the button should light up. This function works only if between records there are pauses in length more than 10 seconds.

Cartridge extraction
1. Press the button of emission of the cartridge “”, - reproduction stops, and the cartridge jumps out from a kassetopriyemnik.
2. The cartridge jumps out even at the switched-off tape recorder if the ignition key is in the situation "ASS". To insert the cartridge it is possible only after inclusion of a food of system.

Use of the metallized and chromeplated tapes

When playing cartridges with the metallized or chromeplated tape the player automatically is switched to a mode of high-quality reproduction. During playing of such tapes the corresponding indicator burns.

Precautionary measures when using a cassette player

1. To keep high quality of sounding, Nissan recommends to use cartridges with duration of reproduction less than 60 minutes.
2. It is not necessary to leave the cartridge in a player. Store cartridges in protective covers and do not allow hit on them direct sunlight, heat, moisture and magnetic materials.
3. When heating from solar radiation the cartridge can be deformed and become unsuitable for use.
4. Do not use the cartridge with lagging behind stickers which can get stuck in a player.
5. If the tape in the cartridge was weakened, insert a pencil into one of peremotochny naves and densely reel up a tape on the cartridge roller. The weakened tape can hesitate that will worsen quality of its sounding.
6. Eventually reading out, tightening and capstans become soiled fragments of a magnetic layer of a passable tape. Such polluting stratification leads to easing and reproduction distortion in view of what heads should be cleared periodically by means of the special cartridge.

Automatic change of compact discs

1. This function operates only if the automatic machine for change of disks is established and the shop with compact discs is inserted.
2. Turn the ignition key in the situation "ASS" or "ON" and press the button of inclusion of a CD player.
3. For disk change in shop press the BAND/DISC/34 switch.
4. Press the Shch or Ü button for transition to the following or previous record.
5. For fast scrolling of a disk forward or press the Shch or Ü button back and hold it pressed during more than 1 second.
6. For repeated reproduction of the current record press the RPT button.
7. For inclusion of function of scanning press the SCAN button. After the control lamp will light up, press two times the Shch or Ü button for scanning start forward or back.
8. For playing of any casually chosen record of the current disk press the RAN button (casual).

Electromechanical reception aerial

1. Before including a radio receiver it is necessary to be convinced that near an exit of the aerial there are no people, and that the mast of the aerial can be put forward without hindrances.
2. In order to avoid aerial damage in the course of an automatic wash of the car it is necessary to make sure previously that it is completely cleaned.
3. Sticking to a mast of the aerial of dirt and extraneous subjects can lead to electric drive jamming. From time to time wipe a mast the humidified pure rags.
4. Vydviganiye of the aerial occurs automatically at radio receiver inclusion. Switching off of the tuner leads to an automatic ubiraniye of the aerial. If radio is not switched off, the aerial is put forward and cleaned at ignition key turn in the situation "ON" or "OFF".

The CD player (if it is established)

Appearance of the control panel of a CD player is shown on an illustration.

Security system

The design and principle of functioning of security system of a CD player are similar described above for an autoradio tape recorder. Blocking joins in attempt of unauthorized removal of a player from the car, and also at disconnection of a food from it.

Player unblocking As was already mentioned above if for any reason there is a food shutdown, the CD player appears blocked. After restoration of a food and player inclusion on the display of the control panel the inscription “-Сod-” is highlighted. For unblocking of a player and restoration of its working capacity do the following:

a) Include a radio receiver. There is an inscription “-Cod-”;
b) Press any button (except for the button of extraction of a disk “”). There is an inscription “— 0000”;
c) In pressing of buttons of search: TORAHS, and, gather a code, - the entered code is displayed on the display;
d) Press the RANDOM button for code input. The module will be unblocked and starts to work. At input of the wrong code on the display the inscription is highlighted “----”. It is necessary to wait 10 seconds and to repeat attempt.

Code indicator


The burning control lamp of the CODE indicator specifies that the security system is in a ready state. Before leaving the car, it is necessary to check always readiness of system on the indicator for what switch off a radio receiver and ignition. the control lamp of the indicator starts to blink.

Rules of use of a CD player

In cold or rainy weather the increased humidity of air can cause failures in CD player work. In such cases it is necessary to pull out a player and completely to dry or ventilate it. On rough roads the reading-out head of a player can get off from a path. At high temperature of air in salon the CD player can cease to work. In this case before its use it is necessary to cool salon. Do not allow hit of direct sunshine on a CD player.


1. Turn the ignition key in the situation "ASS" or "ON". Insert a disk into the disk drive (the title party top). After a partial entrance the disk is picked up and loaded into a crack automatically then playing begins. After disk loading on the display within 5 seconds the number of records and a total time of playing is highlighted. When loading a 8-centimetric compact disc on the display there is CD SINGLE inscription.
2. If during loading of a disk the radio receiver or a cassette player works, they are automatically disconnected and compact disc reproduction begins.
3. Loudness, a tonality, balance and depth of sounding are regulated by handles of management of radio.
4. Before to insert a disk into the disk drive make sure on a control lamp of "DISC IN" (see below) of lack of other disk. Attempts insert a disk can to lead force to different damages.

Indicator of existence of a disk

When the compact disc is loaded into a player, “DISC IN” inscription burns with red color.

RESET button

This button is intended for start of a normal operating mode of a player. After any works with electroconducting of a player follows, right after its inclusion and before the reproduction beginning, it is obligatory to press the RESET button for 2 seconds.

PLAY/STOP button

PLAY/STOP

The pressing of this button during playing leads to shutdown of the display and the reproduction termination. The repeated pressing of the button renews playing from a stop place.


Buttons of manual search

The pressing of this button leads to the accelerated prokruchivaniye of the current record forward. Pressing and releasing the button, it is possible to hear to record quickly.

The pressing of this button leads to a fast prokruchivaniye of record in the opposite direction.

Function of automatic search

The pressing of this button leads to transition to the following record. The single pressing of the button increases number of the current record on the display on 1. At constantly pressed button the counter continuously passes forward from one record to another. To begin playing with the necessary record, establish on a board number of this record and release the button.

The pressing of this button leads to transition to the previous record. The single pressing of the button leads to repeated reproduction of the current record since its beginning. At constantly pressed button the counter continuously passes back from one record to another. To begin playing with the record having number smaller, than at the current record, establish on a board number of this record and release the button.

The return button by the beginning


TOP

The pressing of this button during playing leads to return to the first record on a disk and to its reproduction.


Repetition button

REPEAT

This button is intended for repeated listening of the current record. After pressing of this button on the display “REPEAT” inscription is highlighted, and after the completion of the current record it repeats since the beginning. In a mode of repetition only the current record is lost. To return a mode of usual playing press the button once again. The inscription of REPEAT disappears.
Function of repetition is not cancelled after a stop of a disk or after switching off of a food by the ASS switch.


Button of preliminary listening

SCAN

Function of preliminary listening allows to familiarize quickly with all records on a disk. After pressing of the SCAN button a board there is an inscription of the corresponding contents, and the player consistently reproduces the first ten seconds of each record. After the last record scanning of all disk repeats. For shutdown of scanning press this button once again. The inscription on a board disappears, and the mode of usual consecutive reproduction renews.


Button of a casual choice

RANDOM

After pressing of this button during playing on a board there is “RANDOM” inscription, and the built-in microprocessor starts to choose in a random way an order of reproduction of records on a disk. For shutdown of a casual choice of records once again press this button. The inscription on a board disappears, and the mode of usual consecutive reproduction renews.

The sequence of records gets out in a random way that does not exclude possibility of repetition of the same record two times in a row.


Function of a casual choice is not cancelled after a stop of a disk or after switching off of a food by the ASS switch.

Button of extraction of a disk


The pressing of this button leads to disk emission. Thus it is not important, the disk is lost or costs. If at the open reception panel of a player to press the button of reproduction or to press the reception panel, there is an automatic loading of a disk to the subsequent inclusion of a mode of reproduction. If the reception panel of a player remains open within more than 15 seconds, there is the automatic closing of the reception panel protecting a compact disc from casual damage. In this case automatic inclusion of a mode of reproduction does not occur.


8-centimetric compact discs cannot be loaded into a player by pressing of the button of reproduction. The automatic loading mode in this case also does not work.