Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
- Settings and routine maintenance
   Schedule of routine maintenance of Nissan Maxima cars
   General information
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF of automatic transmission
   Replacement of impellent oil and oil filter
   Check of a condition of seat belts
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of a driving belt
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of a condition of components of a power supply system
   Check of brake system
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of the RKPP transmission oil
   Replacement of a filtering element of an air purifier
   Replacement of the fuel filter
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of ATF of automatic transmission and main transfer
   RKPP transmission oil replacement
   Check of a condition of components of a suspension bracket and steering drive
   Check of a condition of the EGR valve
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





9a1e70e9 .



Settings and routine maintenance

Specifications

Recommended greasings and liquids

Below greasings and the liquids recommended for application by the company manufacturer of cars at the moment of drawing up of the real Management are listed. Fresher information can be received at firm car repair shops of the Nissan company.


Type and properties of working liquids

 


Fuel Unleaded gasoline is not worse АИ95
Impellent oil:
Type Universal engine oil for petrol engines certificated on API
Viscosity See the card of vyazkost on an illustration
Transmission liquid for AT Nissan-Matic "D" type ATF
Transmission oil for RKPP Transmission API GL-4 80W-90 oil
Brake liquid DOT 3
Liquid of system of hydrostrengthening of a wheel ATF DEXRON III
Greasing for wheel bearings Lithium NLGI No. 2 greasing
Cooling liquid (50 ÷ 70) % antifreeze solution on base этиленгликоля with water
Volumes of working liquids, л*
Capacity of a fuel tank 70
Impellent oil (including the oil filter)
Models 1993 and 1994 of вып. 3.9
Models since 1995 вып. 4.0
Cooling liquid
Models 1993 and 1994 of вып. 8.27
Models since 1995 вып. 8.5
Transmission liquid for AT The best way of definition of ATF of quantity of fresh liquid necessary at change is measurement of volume of ATF merged from transmission
Transmission oil for RKPP
Models 1993 and 1994 of вып. 4.2-4.5
Models since 1995 вып. 4.5-4.8
All volumes are specified only approximately. At adjustment be verified with urovnevy labels.
Ignition system
Spark plugs:
Models 1993 and 1994 of вып.
Type NGK BKR5ES-11, or equivalent to them on performance data
Interelectrode gap, mm 1.0-1.1
Models since 1995 вып.
Type NGK PFR5G-11, or equivalent to them on performance data
Interelectrode gap, mm 1.1
Resistance of candle wires, Ohm/dm Not above 3033
Ignition order 1-2-3-4-5-6

Scheme of an arrangement of cylinders and direction of rotation of the distributor of ignition (only models 1993 and 1994 of вып. - on models since 1995 вып. the ignition system without the distributor) is used

Adjustment of klapanny gaps on the cold engine (model since 1995 вып.)
Inlet valves, mm 0.254-0.330
Final valves 0.279-0.381
Brake system
Minimum admissible thickness of frictional overlays of blocks of disk brake mechanisms, mm 1.59
Adjustment of the parking brake 10-11 clicks of a ratchet
Suspension bracket and steering
Maximum admissible люфт steering wheel, mm 30.16
Admissible weak point of landing of spherical support, mm 0
Efforts of a tightening of carving connections Nanometer
Drain stopper of a case of AT 29.8-39.3
Bolts of fastening of the pallet of a case of AT 7.0-8.9
Drain stopper of a case of the engine 29.8-39.3
Drain stopper of a case of RKPP 24.4-33.9
Spark plugs 18.9-29.8
Nuts of fastening of wheels 97.6-118.0

The scheme of an arrangement of components in an impellent compartment of the car (the model of 1995 вып is shown.)

1 — the PCV Valve
2 — Spark plugs (under covers)
3 — the Fuel filter
4 — the Tank of brake liquid
5 — an air purifier Casing
6 — the Storage battery
7 — the Assembly block of safety locks
8 — the Assembly block of the relay 2

9 — Shchup of measurement of level of ATF
10 — Shchup of measurement of level of impellent oil
11 — a radiator Cover
12 — the Broad tank of system of cooling
13 — the Tank of liquid of washing of a windscreen
14 — the Cover of a jellied mouth of impellent oil
15 — the Tank of liquid of system of hydrostrengthening of a wheel
16 — the Assembly block of the relay 1


The bottom view on a car front

1 — the Compressor of the conditioner of air
2 — Nizhny a radiator hose
3 — the Drain stopper of a radiator
4 — the Stopper ATF plum
5 — the Bottom spherical support

6 — Protective covers of CV JOINTS of a power shaft
7 — Section of system of production of the fulfilled gases
8 — the Drain stopper of the pallet of a case
engine
9 — the Support of the brake mechanism


The typical bottom view on a car back

1 — Section of system of production of the fulfilled gases
2 — the Exhaust silencer
3 — the Fuel tank
4 — the Rack of a back suspension bracket

5 — Zadny Bridge
6 — the Cross-section bar of the back bridge
7 — the Disk brake mechanism of a back wheel
8 — the Longitudinal lever of a back suspension bracket