Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
- Settings and routine maintenance
   Schedule of routine maintenance of Nissan Maxima cars
   General information
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF of automatic transmission
   Replacement of impellent oil and oil filter
   Check of a condition of seat belts
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of a driving belt
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of a condition of components of a power supply system
   Check of brake system
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of the RKPP transmission oil
   Replacement of a filtering element of an air purifier
   Replacement of the fuel filter
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of ATF of automatic transmission and main transfer
   RKPP transmission oil replacement
   Check of a condition of components of a suspension bracket and steering drive
   Check of a condition of the EGR valve
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Service of system of cooling (oporozhneniye, washing and filling)

Do not allow antifreeze hit on open sites of a body and the painted surfaces of the car. Casual splashes immediately wash away a plentiful quantity of water. Remember that antifreeze is extremely toxic liquid and its hit in an organism even in small amounts is fraught with the most serious consequences (up to a lethal outcome). Never leave antifreeze being stored in leaky closed container and immediately collect cooling liquid spilled on a floor. Remember that the sweetish smell of antifreeze can draw to itself attention of children and animals. About ways of utilization of the fulfilled cooling liquid consult with local authorities. In many regions of the world special points on different reception of working off are equipped. At all do not merge old cooling liquid in the sewerage and on the earth!

Recently nontoxical grades of antifreeze were developed, however they also demand care in the address.

Regularly, according to the schedule of routine maintenance of the car (see. Undressed the Schedule of routine maintenance of Nissan Maxima cars), the system of cooling should be emptied, washed out and filled with a fresh mix of antifreeze with water. Such service allows to prevent corrosion development in an okhladitelny path and considerably increases efficiency of functioning of system. During service also the condition of all hoses of system and a cover of a jellied mouth of a radiator (without fail should be checked see. The section Check of a condition and replacement of the hoses located in an impellent compartment). Defective components are subject to replacement. Do not forget about precautionary measures which should be observed at service of system of cooling (see the prevention at the beginning of the Section).


Oporozhneniye

 PERFORMANCE ORDER

1. Cock the parking brake and prop up wheels protivootkatny boots. It is necessary to start direct performance of procedures of service after complete cooling of the engine, i.e. some hours later after trip end.

2. Having waited final cooling of the engine, uncover a jellied mouth of a radiator, get capacity suitable on volume under the drain gate located in the lower part of radiatorny assembly. Pull on the union a hose piece in internal diameter about 9.5 mm which second end lower in drain capacity (such hose can enter into a standard complete set of some models). Weaken the gate and lower cooling liquid in capacity.

3. On termination of an effluence of cooling liquid from a radiator move capacity under a drain opening of the block of cylinders (such openings are provided from each of the parties of the power unit. Turn out a stopper and lower liquid from the engine.

If after a stopper reversing liquid does not start to follow from an opening, clean it from traces of corrosion by a suitable screw-driver.

4. While liquid merges from the block, check a condition of hoses of an okhladitelny path and collars of their fastening (see. The section Check of a condition and replacement of the hoses located in an impellent compartment).
5. Replace the damaged or failed components (see. Head of System of cooling, heating). Screw on a place and strongly tighten drain jams.


Washing

 PERFORMANCE ORDER

1. On termination of an oporozhneniye of system remove from the engine the thermostat (see. The head of System of cooling, heating), take it from a casing and establish the last back on the regular place (empty). Now the system is ready to washing.
2. Tighten the drain gate of a radiator, connect the bottom radiatorny hose. Transfer the handle of management of functioning of system of heating of salon to the maximum heating to provide also due washing of the heat exchanger of a heater.

3. Disconnect the top hose from a radiator and insert into a landing branch pipe of the last a garden hose. Include water supply and continue washing until the pure transparent stream will not start to follow from the top hose.

4. In cases of especially strong pollution or violation of passableness of a radiator, remove the last (see. The head of System of cooling, heating) also deliver it for regenerative repair and service in a car-care center workshop. Products of corrosion and dense deposits are removed from a path of system of cooling by chemical processing, - follow instructions of manufacturers of the cleaner acquired by you.

At regular performance of procedures of washing of system and replacement of cooling liquid need for carrying out chemical processing of a path should not arise.

5. Having finished washing, empty a radiator and lower the water remains from the block of cylinders.


Filling

 PERFORMANCE ORDER

1. Restore initial connection of radiatorny hoses and establish into place the thermostat.
2. Transfer the handle of management of system of heating of salon to the maximum heating.

3. Slowly fill in in a radiator fresh, made in demanded proportions (see. Specifications) an antifreeze mix with water. Continue filling until level of liquid will not rise to the bottom cut of a jellied mouth. Add cooling liquid in a broad tank, having finished its level to the bottom mark (FULL COLD). Wait five minutes and once again check level of cooling liquid in a radiator, in case of need make adjustment.

On models 1993 and 1994 of вып. for production of the air which has got to an okhladitelny path weaken stopper specially intended for this purpose on the engine block. When from under jams cooling liquid will start to follow, again tighten it and correct liquid level in a radiator.

4. Without establishing on a radiator a cover, start the engine and warm up it before opening of the valve of the thermostat (liquid should start to circulate through a radiator, thus there will be a warming up of the top hose of the last).
5. Muffle the engine and let's to it cool down. Add in a radiator a little more liquid, having finished its level to the bottom cut of a jellied mouth.
6. By a szhimaniye of the top hose of a radiator let out from it air, in case of need add a little more cooling liquid. Establish into place a radiator cover.
7. Transfer the handle of management of system of heating of salon to the maximum heating, turn on for the maximum speed the heater fan.
8. Start the engine, warm up it to normal working temperature and check system on existence of signs of leaks.