Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
- Settings and routine maintenance
   Schedule of routine maintenance of Nissan Maxima cars
   General information
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF of automatic transmission
   Replacement of impellent oil and oil filter
   Check of a condition of seat belts
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of a driving belt
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of a condition of components of a power supply system
   Check of brake system
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of the RKPP transmission oil
   Replacement of a filtering element of an air purifier
   Replacement of the fuel filter
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of ATF of automatic transmission and main transfer
   RKPP transmission oil replacement
   Check of a condition of components of a suspension bracket and steering drive
   Check of a condition of the EGR valve
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
9a1e70e9



Check of a condition of components of a suspension bracket and steering drive

The condition of components of a suspension bracket and steering drive should be made regularly as their wear or damage can be at the bottom of reduction of service life of tires, conduct to decrease in controllability of the car and fuel consumption increase. The detailed illustrative material is presented also in Head the Suspension bracket and a steering.


Shock-absorbers

 PERFORMANCE ORDER

1. Park the car on an equal horizontal platform, whenever possible with a firm covering. Muffle the engine and cock the parking brake. Check pressure of a rating of tires.
2. For an assessment of a condition of shock-absorbers serially press down one of car corners. At a corner otpuskaniye the body should come back to a starting position, making no more than one-two fluctuations. Listen to a scratch and the other extraneous noise published by a suspension bracket at oscillating motions of a body. For more details see. Head Suspension bracket and steering.
3. Excessive quantity of raskachivaniye of a body at a corner otpuskaniye, no less than refusal of its return to a starting position, testify to need of replacement of shock-absorbers.
4. Operating in a similar manner, serially check each of four shock-absorbers.
5. To Poddomkratta the car also establish it on props.

6. Examine suspension bracket racks on existence of traces of leakage of hydraulic liquid. Insignificant moistening of a rod should not cause special concern. At identification appreciable потеков it is necessary to try to define a leak source, - if it is the shock-absorber, it is necessary to replace it complete with opposite.

7. Make sure of reliability of fastening of shock-absorbers and in lack of signs of their mechanical damages. Defective shock-absorbers are subject to replacement in pairs (forward or back).
8. The description of procedures of removal and installation of shock-absorbers is provided in Head the Suspension bracket and a steering.


Components of a steering drive and suspension bracket

 PERFORMANCE ORDER

1. Visually estimate a condition of components of a steering drive and suspension brackets (forward and back). Pay attention to such defects, as cracks, dents, damage of rubber components, existence of traces of leakages of hydraulic liquid, etc. It is necessary to give special attention to a condition of rezinometallichesky plugs by means of which the bottom levers of a suspension bracket fasten to the car chassis.

2. Wipe the lower part of a rotary fist, ask the assistant to grasp a wheel in points on 12 and at 6 o'clock and to pull it in the perpendicular direction, - thus estimate density of landing of a spherical support of fastening of the lever of a suspension bracket in a fist. Existence slightest люфта testifies to need of replacement of a support.

3. Grasp a wheel in points on 3 and at 9 o'clock and pull its edges in opposite directions. Existence a little appreciable люфта testifies to wear of components of a steering drive, - check a condition of the pendular lever and tips of steering drafts.

4. More detailed information and an illustrative material on components of a suspension bracket and the helmsman of a drive are provided in Head the Suspension bracket and a steering.


Protective covers of power shafts

 PERFORMANCE ORDER

1. Speed of wear of CV JOINTS directly depends on a condition of protective covers of power shafts. Hit on a surface of covers of oil and greasing conducts to aging of rubber and a premature exit of components out of operation therefore it will be reasonable to wash out from time to time covers solution of soap water.

2. Check covers on existence of cracks and signs of leakages of greasing, - do not forget to move apart a fold гофра for survey of their inside. Defective covers are subject to replacement (see. Head Coupling and power shafts).