The device, service, Nissan Maxima QX repair - DOHC Engines//Maxim's Nissan (from 1993 g) accessories-sale.ru

Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
- Engine
   + SOHC Engines
   - DOHC engines
      General information
      Preparatory actions and the list of repair procedures which can be executed without engine extraction from the car
      Reduction of the piston of the first cylinder in the provision of the top dead point (VMT)
      Removal and installation of covers of heads of cylinders
      Check and adjustment of gaps of valves
      Replacement of maslootrazhatelny caps and klapanny springs with plates
      Removal, check of a condition and installation of a chain and asterisks of a drive of GRM
      Removal and installation of camshafts and pushers of valves
      Removal and installation of the inlet pipeline
      Removal and installation of final collectors
      Removal and installation of heads of cylinders
      Removal and installation of a pulley of a cranked shaft
      Replacement of a forward epiploon of a cranked shaft
      Removal and installation of the pallet of a case of the engine
      Removal, check of a condition and installation of the oil pump
      Removal and flywheel installation / driving disk
      Replacement of a back epiploon of a cranked shaft
      Check of a condition and replacement of support of a suspension bracket of the power unit
   + General major maintenance of the engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
9a1e70e9



DOHC engines

General information

This Part of Head is devoted not connected with extraction from the car (in situ) to repair of the V6 DOHC engine of a series of VQ30DE 3.0 l, applied to a complete set of models since 1995 вып. The description of all procedures demanding dismantle of the power unit, is provided in the Part Check of a condition and replacement of support of a suspension bracket of the power unit of the present Chapter.

Descriptions of the most part of considered procedures are made on the basis of the assumption that the power unit remains on the regular place in an impellent compartment of the car. In view of told in case the engine is already dismantled and established on a workbench or the assembly stand, many of described steps should be lowered.