Nissan Maxima QX

since 1993 of release

Repair and car operation


Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
- Power supply system and release
   General information
   Sbrasyvaniye of pressure in a power supply system
   Check of serviceability of functioning of the fuel pump, measurement of pressure of fuel
   Check of a condition and replacement of fuel lines and their shtutserny connections
   Removal and installation of the fuel pump
   Check of a condition and replacement of the sensor of fuel consumption
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - general information
   Removal and installation of assembly of an air purifier
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of injection
   Check of a condition and replacement of the case of a throttle
   Removal and installation of a regulator of pressure of fuel
   Removal and installation of the fuel highway and injection injectors
   Check and adjustment of turns of idling
   Release system - the general information
+ engine Electric equipment
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

9a1e70e9

Removal and installation of assembly of an air purifier

Details of installation of assembly of an air purifier and accompanying components on models 1993 and 1994 of вып.

1 — Perepuskna an air hose of the IAC valve
2 — the Sensor of weight of an air stream
3 — the Top section of a casing of an air purifier
4 — Clamps of fastening of a casing of an air purifier

5 — the Bottom section of a casing of an air purifier
6 — the Reception air line
7 — Fixing collars


Details of installation of assembly of an air purifier and accompanying components on models since 1995 вып.

1 — the Hose of ventilation of a case
2 — the Resonator of an inlet air path
3 — the Sensor of weight of an air stream
4 — the Sensor of temperature of soaked-up air
5 — the Top section of a casing of an air purifier

6 — Clamps of fastening of a casing of an air purifier
7 — the Bottom section of a casing of an air purifier
8 — the Reception air line
9 — Fixing collars


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Disconnect electroconducting from sensors of weight of an air stream and temperature of soaked-up air.
3. Release a clamp of fastening of the sensor of weight of an air stream on the inlet sleeve/resonator.
4. Release spring clamps, remove the top section of a casing of an air purifier in assembly with the sensor of measurement of a workshop of car-care center of an air stream.

5. Turn out three fixing bolts and accurately take the bottom section of a casing of assembly of an air purifier from an impellent compartment.

6. Installation is made upside-down.