Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
- Engine electric equipment
   General information and precautionary measures
   Engine start from the auxiliary power supply
   Check of a condition and battery replacement
   Check of a condition and replacement of wires of the battery
   Ignition system - the general information and precautionary measures
   Check of functioning of system of ignition
   Check of a condition and replacement of coils of ignition
   Check of a condition and replacement of the power transistor (model 1993 and 1994 of вып.)
   Check, adjustment, removal and installation of the distributor of ignition (model 1993 and 1994 of вып.)
   Check and adjustment of installations of a corner of an advancing of ignition
   Charge system - the general information and precautionary measures
   Check of a condition of system of a charge
   Removal and generator installation
   Start system - the general information and precautionary measures
   Check of serviceability of functioning of a starter and start chain
   Removal and starter installation
   Replacement of the traction relay
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Check of a condition and replacement of coils of ignition

Models 1993 and 1994 of вып.

CHECK

 PERFORMANCE ORDER

1. At the switched-off ignition disconnect electroconducting from the coil. Connect an ohmmeter between plugs of primary contour of the socket. Compare results of measurements to requirements of Specifications. The faulty coil is subject to replacement.

2. Not including ignition, connect an ohmmeter between VV (to which the wire going from a cover of the distributor) and positive by plugs of the coil is connected. Compare results of measurements to requirements of Specifications. The faulty coil is subject to replacement.

REPLACEMENT

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

 If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!
2. Disconnect from the coil electroconducting.

3. Disconnect VV an occasion going from a cover of the distributor.

4. Turn out fixing bolts and remove the coil from the engine.

5. Installation is made upside-down.

 Before installation it is necessary to connect the socket of electroconducting of spark plugs (grease internal walls of a protective cover with dielectric silicone greasing) to the coil.


Models since 1995 вып.

CHECK

 PERFORMANCE ORDER

1. At the switched-off ignition disconnect electroconducting from the coil. Connect positive щуп an ohmmeter to the plug No. 1, negative - the No. plug 2 sockets of the coil. The device should show infinity. Change polarity of connection of a measuring instrument, - conductivity (but not zero resistance) this time should take place. At negative results of check replace the coil.

2. Connect an ohmmeter between the wire VV plug (going to a spark plug) and the plug No. 1. The measuring instrument should register infinite resistance, otherwise replace the coil.
3. In a similar manner check a condition of coils of the remained spark plugs. Replace defective components.

REPLACEMENT

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

 If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Disconnect from the coil electroconducting.

3. Turn out fixing screws and remove the coil, having pulled it up rotary motions.

4. Installation is made upside-down.

 Before installation grease internal walls of a protective cover with dielectric silicone greasing.