Nissan Maxima QX

since 1993 of release

Repair and car operation



Nissan Maxima QX
+ Nissan Maxima brand Cars
+ Maintenance instruction
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
- Engine electric equipment
   General information and precautionary measures
   Engine start from the auxiliary power supply
   Check of a condition and battery replacement
   Check of a condition and replacement of wires of the battery
   Ignition system - the general information and precautionary measures
   Check of functioning of system of ignition
   Check of a condition and replacement of coils of ignition
   Check of a condition and replacement of the power transistor (model 1993 and 1994 of вып.)
   Check, adjustment, removal and installation of the distributor of ignition (model 1993 and 1994 of вып.)
   Check and adjustment of installations of a corner of an advancing of ignition
   Charge system - the general information and precautionary measures
   Check of a condition of system of a charge
   Removal and generator installation
   Start system - the general information and precautionary measures
   Check of serviceability of functioning of a starter and start chain
   Removal and starter installation
   Replacement of the traction relay
+ Control systems of the engine
+ Transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Check of a condition and replacement of the power transistor (model 1993 and 1994 of вып.)

 The power transistor is among fragile and enough expensive components. Violation of performance of procedures offered below an order can lead to RSM failure. Remember that on everything, operated RSM components extend additional federal guarantee certificates, - before undertaking attempts of independent performance of service or replacement of components consult in representation office of the manufacturing company of the car.

CHECK

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

 If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Disconnect electroconducting from the power transistor.

3. Connect positive щуп an ohmmeter to the socket plug A, negative - to V.Pribor's plug should register conductivity existence. Change polarity of connection of an ohmmeter, - on it time the indication should equal infinity.

REPLACEMENT

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

 If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Disconnect electroconducting from the power transistor.

3. Turn out a bolt of fastening of the transistor with a basic arm to a head of cylinders.

4. Turn out two bolts of fastening of the basic carburetor. Establish on an arm the new transistor.
5. Further installation is made as it should be the return to an order of dismantle of components.